KN/KT 2-Jaw / 3-Jaw Standard Lathe solid Hydraulic Power Chuck
(1). KN / KT solid hydraulic chuck with 4 inch, 5 inch, 6 inch, 8 inch, 10 inch, 12 inch, 15 inch, 18 inch, 21 inch, 24 inch size and divided into 2- jaw type, 3-jaw type.
(2). Clamping force is large, long stroke achieve large clamping range. Suitable for processing general workpieces, more economical.
(3). When loading different workpieces, only need to change the clamps to use.
(4). Repeat positioning accuracy : 0.02mm.
(5).Material: Steel.
Other supplier products
|
|
BN/BT/BH 2-Jaw / 3-Jaw / 4-Jaw Standard Lathe High Speed Hollow Hydraulic Power Chuck |
(1). BN / BT / BH hollow hydraulic chuck with 4 inch, 5 inch, 6 inch, 8 inch, 10 inch, 12 inch, 15 inch, 18 inch, 21 inch, 24 inch size and divided... |
|
|
NHRD 45 degrees/90 degrees Automatic Quartered Centering Hydraulic Indexing Power Chuck |
(1). NHRD chuck NHR chuck based on the expansion of the center positioning workers to ensure that the workpiece when drilling position accuracy. (2... |
|
|
NHU 45 degrees/90 degrees High-Speed Automatic Quartered Hydraulic Indexing Power Chuck |
(1). Due to the small outer diameter of the chuck, suitable for small CNC lathes. (2). In the work of no loss of grip, the smaller hydraulic pressu... |
|
|
NHRS 45 degrees/90 degrees Automatic Subdivision Quartered Additional Angle Hydraulic Indexing Power Chuck |
(1). NHRS chuck can be 4 x 90 degrees indexing also added 3 degrees, 4 degrees, 5 degrees additional indexing; (2). Parts once clamping, Machinable... |
|
|
NHRP 45 degrees/90 degrees Automatic Quartered Power-Dividing Hydraulic Indexing Power Chuck |
(1). NHRP chuck for processing plane parts and long axis of the workpiece; (2). NHRP chuck equipped with strength adjustment switch, according to t... |
All supplier products
Same products
