Aerosol Of External Spraying Release Agent For Bias TireAerosol Of External Spraying Release Agent For Bias Tire
Product Name: External Spraying Release Agent for rubber bias tiresProduct Type: L335Product Feature:1. Milk white liquid, the proportion is 0.99 kg/liter, no flash point.2. It’s polymer emulsion concentrate contains special lubricating and separation components, which has the characteristics of small surface tension, good film ductility, oxidation resistance, high temperature resistance, non-toxic, non flammable, good release durability, protect the molds and so on.3. It can give molded products a bright and clean surface, one time spraying can be for repeated mold release several times. Scope of application:It’s suitable for the mold release, isolation and lubrication of rubber tires, sundries, pipe, plate and other hot mold pressing products.Using method:1. Before the use, it’s diluted by deionized water with a 1:5-15 solution, the best ratio should be determined by the test, in order to avoid excessive use.2. Spraying or brushing method, the solution will be evenly sprayed in the hot mold cavity, then can start production.3. The solution should be just prepared when use it, and can’t be rewinded back again.4. Should keep the container sealed, can’t be mixed with other release agent or acidic and alkaline substances.Packing, Storage and Transport:1. 25kg or 200kg per drum2. Transport as the non hazard goods, stored in the warehouse under 2-42℃, and prevent freezing.3. Properly use it can’t cause the damage, if need the full details, please ask us MSDS.Shelf Life:6 months
Other supplier products
All supplier products
Same products
