Carpet Flammability Tester
Standards:
BS 4790, ISO 6925, BS 6307
Applications:
The Flammability Tester is used to test the effects of a small source of ignition on floor coverings. It can be used for either the hot metal nut test (BS 4790) or the methenamine tablet test (ISO 6925 and BS 6307).
Product Information:
The test chamber is manufactured from non-combustible heat resistant board with a counter weighted sliding panel for easy access. The mirror on top of the chamber allows the operator to view the specimens during the test.
Features:
1. Complete with measuring grid and clamping ring;
2. Sliding panel for easy access;
3. Angled mirror for viewing;
4. Applicable to 2 different tests, enclosed unit for optimum;
5. Safety.
Test Method:
The stainless steel nut is heated to a temperature of 900°C in a muffle furnace. The specimen is placed inside the test chamber and the clamping rig is placed onto the sample using crucible tongs supplied. The heated nut is placed in the centre of the clamping rig. After 30 seconds the nuts removed and the effects of the ignition allowed to subside. Measurements are then made to assess the spread of the ignition on the sample. It is recommended that the test chamber is placed in a laboratory fume hood. The conditioned specimens are placed on the removable base inside the test chamber and the metal plate with a circular cut-out is placed on the sample. The tablet is placed at the centre of the specimen and ignited. After the flame has extinguished, measurements are taken to assess the effects.
Consumables:
- Test Chamber(includes furnace)
- Accessories for Hot Nut Test
- Accessories for Methanamine Tablet Test
- M16 Nut for Hot Nut Test
- Methylamine Tablets for Methylamine Tablets Test
Other supplier products
|
|
AATCC 195 Moisture Management Tester |
Testing Standards: AATCC 195, SN 1689.1, GB/T 21655.2 Moisture management tester is the tool for the measurement, evaluation and classification of... |
|
|
Water Vapor Permeability Test instruments |
Standards:UNI EN IUP/15, UNI EN 13515, EN ISO 20344: 6.6, IUP 15, BS 3144 Method 24, SLP 25，DIN 53333, ISO 17699, DIN 53 429, METODO - 309 WI 009Ap... |
|
|
Dry Cleaning And Washing Cylinder |
Standards:
AATCC 162, 16 CFR Part 1610
Applications:
Dry Cleaning and Washing Cylinder is designed for determining color fastness to dry c... |
|
|
Protective Clothing Vertical Flame Spread Tester |
Standards:
BS EN ISO 15025:2002
Applications:
The instrument is applied for the testing of fire hazard using com-bustible materials, like ... |
|
|
Medical Face Masks filter material Particulate filtration efficiency tester |
Medical Face Masks filter material Particulate filtration efficiency tester is used for performance testing of filter elements, disposable masks, f... |
All supplier products
Same products
