Reciprocating Abraser
Introduction
Fixed sample on a horizontal table, wearing it under the specified abrasive and load with the horizontal movement of the platform. According to the principle of the lever, the other end of the test arm fits the hammer to maintain the balance of the test arm, making ensure the accuracy of the sample surface load and the reliability of the test results. The height of abrasive and load is adjustable, meeting the need of different height samples. In addition, use different friction mediums to test the wear resistance of different products according to the different requirements of customers.
Application
Reciprocating Abraser is used to determine the scratch resistance and wear resistance for paint, plastic, decorative fabrics, automotive interior, cashmere fabric and others.
Standards
1. ASTM F2496 Standard practice for determining the scratch hardness and scrape Adhesion of prints and coatings active standard.
2. ISO 1518-1 Paints and varnishes - Determination of scratch resistance - Part 1: Constant-loading method.
3. ISO1518-2 Paints and varnishes - Determination of scratch resistance - Part 2: Variable-loading method.
4. GME 60248 Paint elasticity and textile interiors material-Resistance to scratching.
5. D44 1221 Fluff surface material-Resistance to scraping by abrasion.
6. D14 1055-2004 Materials and organic coatings-wear by rubbing.
7. D42 Inside and outside plastic parts-Resistance to scratching by abrasion.
Features
1. LCD screen control, you can set the speed, the number of reciprocating motion and other parameters
2. LCD screen real-time display and control the test condition, two-station design, to save test time.
3. Meet a variety of standard requirements. Provide the weights and friction heads according to the needs of users.
Configuration
1. Main engine: 1 set
2. Test arm suit: 2 set
3. Weight suit: 6 (1N, 2N, 2.5N, 5N, 10N, 24N)
4. Φ15 abrasion head: 2 (semicircle R18, length 40mm)
5. Sample holder: 2 set
6.Brush: 1
7.Grinding head repair sandpaper: 1 pack (20 pieces)
8.Stainless steel abrasive fixed
9.CS-10 grinding head: 2
10.H-18 grinding head: 2
Technical Parameters
Items | Parameters |
Stroke range | 6-120mm, adjustable |
Speed range | 1-100 reciprocating/min, stepless adjustable |
Weight | Approximately 48.5kg |
Dimension | 532mm*471mm*630mm(W*D*H) |
Power | 220V, 50HZ, 1A |
Send product request
Other supplier products
Velcro Fatigue Test instruments | Product Information: Velcro Fatigue Testeris designed for opening and closing the hook and loop fasteners, A hook and loop fastener is repeatedly ... | |
Fabric Ultraviolet Tester | The Tester is used to determine the UV transmittance and anti-ultraviolet performance of textiles. You can directly obtain the UV protection factor... | |
Antisynthetic blood penetration tester For protective clothing testing | It is applicable to the resistance of the protective clothing to the synthetic blood penetration under different levels of test pressure. Standard... | |
carpet flammability equipment | Standards:BS 4790, ISO 6925, BS 6307Applications:The Flammability Tester is used to test the effects of a small source of ignition on floor coverin... | |
aatcc rotary vertical crockmeter | Application:Used for printed fabric, textile printing and dyeing industry, especially for the detection of color fastness of printed fabrics to dry... |