National 12-P-160 Triplex Mud Pump Modules
Heat-treated and internally hardened for high durability; available in various materials to meet a wide range of applications; standard one-and/or-two-piece configuration, with designs available for pressure of 5000psi(35.1Mpa), 7500psi(52.7Mpa), and 10000psi(70.3Mpa); discharge connections available on each side; suction connections on each side or front center.
Material is 35CrMoA or 40CrMoNn alloy forged steel. To get better fiber texture, we use electric stove for second forging, or deoridation treatment. It is forged from three directions and the forging ratio is not less than 4.0:1.0. It can not have crack, impurity, looseness, overburns, etc. And weld is not allowed. It should be confirming to the stipulation of JB/TQ252-81, and should be checked by gradeⅢ After quenching the rough module will be rough processed, then the hull hardness is HB285-330.
Mechanical property: σb ≥850MPa, σs≥670MPa, δ≥5%,ψ≥30%.
The two1:6(1:12) taper hole rolling treatments are checked by ring gage. Its contact area has continuous distribution on the circumference. The contact area is not less than 75% .The line of intersection of all cylindrical surface of the hull are facetted obtuse angle by hand or grinding wheel ,forming a circumference R≥8.Test pressure is 49Mpa, keep pressure 1 hour, pressure can not be reduced. Finished products have crack detection report.
Tony.Zhao QingdAO HNA Oilfield Equipment Manufacturing Co.,LTD Email: sales3(at)
Send product request
Other supplier products
 |
Gardner Denver PZ-9 Triplex Mud Pump | Model PZ-9 mud pump is a horizontal triplex single acting piston pump which has the advanced structure and small in size. It has the reliable per... |
 |
Well service EWS-446 triplex mud pump | 一、 HW446 Mud Pump TECHNICAL SPECIFICATION Rated input power 328KW (440HP) Rated Stroke 320 Stroke/Minute(320SPM) Stroke 152.4mm （6"） Gear Ratio ... |
 |
National 10-P-130 Triplex Mud Pump Premium Liner | HNA offers four different type of liners for all popular mud pumps to suit any drilling condition, including Premium Chromium Liners, Ceramic Liner... |
 |
Mud Pump Power End Crank Shaft | Power End Parts HNA supplies power end parts such as Crank shaft, Pinion shaft, Crosshead, Bull Gear, Pulsation Dampener, Frame and so on for follo... |
 |
Petroleum Drilling Tools | Rotary slips HNA supplies three models of Rotary Slips which accommodate drill pipes from 23/8 to 51/2 inch O.D: SDS—Short Rotary Slips SDM... |
