GSET-551 Steel Wire Eddy Current Flaw Detector
GSET-551 Steel Wire Eddy Current Flaw Detector Brief Introduction
Using the eddy current signal processing method and high-performance DSP algorithm, the NDT wire rope testerdetection ability of micro-crack is as high as 0.05mm deep crack.
Using computer digital technology and "digital eddy current detection technology" to achieve high-speed data processing capabilities, detection speed can be reached to 1~500m/min. Technology can effectively suppress all kinds of interference signals. It has waveform, amplitude, phase, X-axis and Y-axis signals.
The professional "digital filtering" is adopted to effectively suppress the interference signal in the field and ensure the accuracy and stability of the detection.
Features of GSET-551 Steel Wire Eddy Current Flaw Detector
The detector detects the minimum metal cross-sectional area change and the minimum length of the damage length corresponding to the local damage.
The detector detects the minimum metal cross-sectional area change and the damage length minimum size corresponding to the metal cross-sectional area loss.
The maximum value of the random error obtained by performing multiple consecutive measurements of the same metal cross-sectional area change in the same test sample under the same test environment and conditions within the instrument range.
Within the range of the instrument, the metal cross-sectional area of the test sample is linearly proportional to the absolute value of the maximum deviation between the measured curve of the instrument and the calibration curve fitted by the measured value of the cross-sectional area of the metal.
The value of the metal cross-sectional area loss measured by the instrument minus the actual value of the metal cross-sectional area loss within the instrument's range.
In the range of the instrument range, under the condition of the length loss of the cross-sectional area of the metal, the cross-sectional area loss of the metal on the wire rope measured by the detector is matched with the value of the loss of the cross-sectional area of a group of wire ropes measured by the instrument. The absolute value of the maximum deviation between the calibration curves.
The detector is capable of detecting the resolved minimum distance.
The detector can detect and display changes in metal cross-sectional area loss (LMA) on one channel, and detect and display local damage (LF) on the other channel. The detector recording device can be a computer, graphic recorder or other matches. device.
The detector cannot simultaneously detect and display metal cross-sectional area loss changes and local damage, and can only detect and display one of them. The detector recording signal device can be a computer, a graphic recorder or other matching devices.
The detector principle and composition meet the requirements of the GB/T 21837-2008 standard, and it has a detector for detecting distance display, data storage or recording function.
GSET-551 Steel Wire Eddy Current Flaw Detector performance
|
Detection channel |
Single-channel |
|
Detection speed |
1～500m/min(on-line) |
|
Frequency range |
100Hz-10MHz |
|
gain |
0～99dB，step size 0.1dB |
|
Advanced filtering |
have |
|
High pass |
|
|
Low pass |
1Hz～10000Hz |
|
Phase rotation |
0-360 ° step 1 ° |
|
Synchronized alarm output controlled by an internal and external clock |
|
High precision end and end-to-tail signal removal |
|
High precision real-time, delayed alarm output |
|
Fast digital／analog electronic balance |
|
Memory track delay blanking function |
|
Real-time impedance plane display |
|
The instrument a match any probe |
|
Remote automatic help system |
|
Computer full digital parameter adjustment |
|
Non-equal amplitude phase／amplitude alarm domain |
As one of the most professional ndt equipment supplies ltd, BKNprovidesndt testing machine, wire rope ndt, eddy current testing, etc. Want to know more? Please contact us.
Send product request
Other supplier products
 |
EDM Notch | Nanjing BKN Automation System Co., Ltd., originated from the eddy current testing laboratory of the Nanjing University of Technology. It is an eddy... |
 |
GSET-551 Steel Wire Eddy Current Flaw Detector | GSET-551 Steel Wire Eddy Current Flaw Detector Brief Using the eddy current signal processing method and high-performance DSP algorithm, the NDT ... |
 |
BKNET-0102 Welded Pipe Eddy Current Flaw Detector | Non destructive weld testing equipment is the use of eddy current technology to test the welded pipe, this type of testing is based on the premise ... |
 |
BKNET-0102 Welded Pipe Eddy Current Flaw Detector | Eddy current weld inspectionis the use of eddy current technology to test the welded pipe, this type of testing is based on the premise of lossless... |
 |
Steel Bar Testing | The steel bar is rolled by a rolling mill and produce both surface defects and internal defects during the rolling process. The internal defect is ... |
