Automatic thermal deformation Vica softening point tester
Product Introduction:
1. Name: Thermal deformation, Vica softening point temperature tester
2. Model :G-1
3. Product introduction: thermal deformation, VICa softening point temperature tester is suitable for non-metallic materials, polymer materials and thermoplastics and thermoplastic pipe fittings thermal deformation, VICa softening point temperature measurement, is the use of the latest international standards and national standards designed and manufactured non-metallic material testing instrument, The testing machine is widely used in chemical industry, scientific research units, colleges and universities, quality inspection departments, but also as a professional production unit ideal test and inspection equipment.
Standard:
GB/T 1633、GB/T 8802、GB/T 1634、ISO 2507、ISO 75、ISO 306、ASTMD 1525.ASTMD 648and so on.
Technical parameters:
1. Temperature control range: ambient temperature ——300 ° C
2. The heating rate: 120 + 10 C/h (12 + 1 ° 6 ℃ / min) or 50 + 5 'C/h (5 + 0.5 ° 6 ℃ / min)
3. Maximum temperature error :±0.5 ° C
4. Deformation measurement method: displacement sensor (accuracy 0.001mm)
5. Deformation measuring range :0mm——2.5mm
6. Maximum deformation error :±0.001mm
7. Number of sample racks: three sets of three temperatures
8. Heating medium: dimethyl silicone oil (buyer's own, physical requirements: flash point above 300℃， viscosity above 200 cess)
9. Heating power :4KW
10. Cooling method: natural cooling above 150'C, natural cooling below 150 "C or water cooling
11. With the protection function of the upper limit temperature arbitrarily set (ambient temperature ——300℃) or the protection of the upper limit of 300℃
12. Control mode :PLC control
13. Working mode of sample rack: automatic lifting
14. Sample support span :64mm/100mm
15. Mixing mode: double motor undamped high-speed mixing, smooth and uniform
16. Maximum test load :50N(5000g)
17. Power supply :AC220V+10%, 50Hz
Send product request
Other supplier products
 |
Seat Ingress/Egress Simulation Tester-QINSUN | Standard ISO 16840(Wheelchair Seating - Test Methods for Determining Mechanical Properties) FMVSS 207(Federal Motor Vehicle Safety Standard for... |
 |
Shoe Abrasion Tester | Product Introduction: The whole shoe wear testing machine is used to test the wear resistance of soles and sole pieces. The principle is to press ... |
 |
Xenon Test Chamber/weather ometer | Introduction Weather-Ometer and Fade-Ometer tester adopts water-cooled xenon lamp. This instrument using argon arc lamp simulation control ideal n... |
 |
Foam Indentation Fatigue Testing Machine-QINSUN | Standard ASTM D3574(Standard Test Methods for Flexible Cellular Materials - Slab, Bonded, and Molded Urethane Foams) ISO 3385(Flexible Cellular... |
 |
Universal Wear Tester | Standards ASTM Standards: D3514, D3885, D3886 (textile, coating, and plastic wear resistance) AATCC Standards: 119, 120 (fabric abrasion and pi... |
Same products
 |
HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line | Seller: Shandong HUASU Plastic Technology Co.,Ltd. | The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi... |
 |
PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
