Scott Flex Tester-QINSUN
Product Introduction:
Scott kneading tester is suitable for back and forth kneading resistance of leather, leather and woven materials.
One end of the sample is fixed in the left fixture, the other end is fixed in the right fixture, with a certain stroke and number of times, and the appropriate pressure, the two samples are bent to each other, after a certain number of times, to assess the degree of damage to the sample.
Meet the criteria:
GB/T 8948-2008. JIS L1096. K6404ASO M403
Product Advantages:
Measures Key Durability Property: Evaluates the resistance of flexible materials to fatigue and damage caused by repeated flexing or kneading.
Standard Compliant: Designed to meet national and international standards for flexing or kneading resistance testing of leather, textiles, and similar materials.
Versatile Material Testing: Applicable to a range of flexible sheet materials like natural leather, artificial leather, and woven fabrics.
Provides Objective Assessment: Allows for assessment of damage after a set number of cycles or determination of cycles to failure.
Controllable Test Parameters: Enables setting and controlling the flexing stroke, number of cycles, and applied pressure.
Product Features:
Based on the provided introduction and the typical design of Scott-type flexing testers for flexible materials:
Clamping fixtures located at both ends to securely hold the test specimen.
Mechanism that moves the clamping fixtures to induce a controlled back-and-forth bending or kneading action on the sample.
Controllable flexing stroke or bending angle.
Counter to record the number of flexing cycles performed.
System for applying a specified pressure to the sample during flexing (as mentioned, "appropriate pressure").
Likely includes multiple testing stations to test several samples simultaneously, increasing efficiency.
Robust construction suitable for repetitive flexing tests.
Product Configuration:
A. One standard specimen laser cutter
B. One set of product manuals and one CNAS-accredited calibration reportProduct Specifications:
4. Specimen Load: 200-2000g (brick-to-brick)
B. Clamp Width: 45mm
C. Clamp Spacing: ~50m (adjustable)
D. Test Speed: 120 times/in
E. Test Stroke: ~60mm (adjustable)
F. Power Supply Voltage: 220V 50Hz
G. Machine Dimensions: 450x370x500mm
H. Machine Weight: 60kg
Send product request
Other supplier products
 |
Air - tightness Testing Device for Automotive Connectors-QINSUN | The air - tightness testing device for automotive connectors uses the pressure principle to conduct non - destructive tightness tests on containe... |
 |
Roughness profiler | Product Introduction: The profiler is measured by the slip of the stylus of the instrument and the surface to be measured, and is a contact measur... |
 |
Anti-glare Panel Falling Weight Tester | Meet the standard GB/T24718-2023，GB/T 24718-2009，JTG/T D33-2012 Scope of application The anti-glare board impact testing machine is designed and... |
 |
Aerospace Fluorine-containing Wire Dynamic Cutting Through Tester | Applicable standards: GJB773B and other standards in the annex G dynamic cutting test requirements Applicable industry: This instrument is the... |
 |
Smoke - Emission Testing Machine for Aerospace Wires and Cables-QINSUN |
Same products
 |
MMA-120 Handheld Arc Welder | Seller: 871183 | The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con... |
 |
SHX Series Circulating Fluidized Bed Steam Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi... |
 |
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ... |
 |
DHL Series Coal-Fired Steam Boilers | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b... |
 |
SZL Series Biomass Steam Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi... |
