Filter Media Tester-QINSUN
The Filter Media Dynamic Filtration Performance Testeris mainly used to test the filtration performance of filter materials. The equipment itself is easy to operate, compact, and sturdy in design. The dust concentration value of the filtration test can be adjusted quickly and conveniently, and the actual use simulation degree is high, simulating a variety of actual conditions. Afterward, the particle size and concentration are measured online by the digital system of the light scattering spectrometer.
As a modern technology enterprise integrating R&D, manufacturing, sales, training, and service, Standard Group (Hong Kong) Co., Ltd. is committed to delivering more testing instruments to the market, providing testing instruments for textiles, leather, combustion, automotive interior and exterior trims, material environmental climate aging, etc., and non-standard customization is also acceptable. Targeted tests can be carried out according to customer requirements before purchase to ensure that the purchased instruments are suitable.
Comply with the standards:
GB/T6719-2009 Technical requirements for bag dust collectors
ISO 11057-2011 Filter performance test of cleanable filter media
VDI 3926-2004 Filter performance test of cleanable filter media
Main features:
1. The dynamic performance detection device for filter materials has the advantages of reasonable structural design, accurate test parameters, and simple and easy operation. It can complete comprehensive performance tests such as resistance and efficiency of filter material cleanliness, aging, and stability.
2. Color LCD operation interface, digital graphics processing, and XDT software can independently display the Chinese interface and edit and process the curve. It has two functions: custom and programmable, and comes with 5 standard test methods. It has a fault self-calibration function. It has an operation encryption function and can be remotely controlled.
Experimental process:
1. Initialization treatment: Determination of dust filtration performance of initial filter material sample, cleaning is performed when pressure loss reaches 1000Pa, and the weight gain of high-efficiency filter membrane and outlet dust concentration is measured and recorded after 30 repetitions;
2. Aging treatment: 10.000 aging treatments with 5-second intervals;
3. Stabilization treatment: Stabilization treatment, installation process A performs 10 dust filtration and cleaning operations;
4. Stabilization treatment: Perform 30 dust filtration and cleaning operations according to A.
Experimental parameters:
Particle type: non-sticky dry powder
Continuous operation time: 1-50 hours
Compressed air requirements: maximum 6bar
Dust mass flow: 0.05g/h-20g/h, continuously adjustable, stability less than 5%
Aerosol outlet mass concentration: 0.012g-13g/h
Power requirements: 100-260VAC/47-63Hz
Filter material test area: 140mm
Filter wind speed: 1-3m/min adjustable
Horizontal pipe flow: 0-3m³/h
Extensible bypass pipe
Pressure sensor: 0-2000Pa, accuracy 2%
Backflush pressure: 0.2-0.6MPa (and can be set by yourself)
Backflush time: 50ms-200ms (and can be set by yourself)
With a time-controlled pulse valve and pressure-controlled pulse valve
Suction flow controller: mass flow meter 80LPM, accuracy 0.1LPM
Dust dispersion compressed air control: Mass flow meter 20LPM, accuracy 0.1LPM
Vacuum pump: 8m³/h, 4X10-4mbar, 550W
Filter material filtration performance control software: capable of sampling pressure signals for A, B, C, and D filtration processes; automatic control of constant pressure injection; injection control during aging process; with manual, semi-automatic, and automatic testing
Control mode: NEU data processing mode.
Send product request
Other supplier products
 |
Automotive Wires Ozone Aging Chamber | Standards ISO 6722: Road vehicles – Electrical cables – Dimensions and test methods. SAE J1128: Low-voltage cables for automotive... |
 |
Rain Tester | Standard AATCC 35: Water Resistance: Rain Test for Fabrics BS EN ISO 22958: Textiles – Determination of Resistance to Water Penetration &nd... |
 |
Geosynthetics thickness tester | Scope of application: Used to determine the thickness of various geosynthetic materials under specified pressure and time. The sample is placed on... |
 |
Taber Abrasion Resistance Tester | Taber Abrasion Tester is also referred to as Taber abraser or Taber abrader, which is used to evaluate the wear resistance of materials or finished... |
 |
SDC Fading Grey Scale | Applicable Standards The SDC Grey Scale adheres to international colorfastness testing protocols, including: ISO 105-A02(Grey Scale for Asses... |
Same products
 |
Resistance Loop Bands | Seller: Shanghai Pisces Sporting & Leisure Products Co., Ltd | Resistance Loop Bandsare versatile fitness tools designed to enhance muscle strength, flexibility... |
 |
Stainless Steel Flux Cored Welding Wire E308T1-1 E308HT1-1 E308LT1-1 Gas Shielded FCAW Wire for 304 Stainless Steel Welding | Seller: 863048 | Product Description stainless steel flux cored wire E308T1-1 E308HT1-1 E308LT1-1,FCAW stainless ... |
 |
E317LT1-1 Flux Cored Wire CO2 Stainless Steel 70% Flux Content 1.0/1.2/1.6mm Diameter OEM Customized 1200C Melting Point | Seller: 863048 | XUNZHUO STAINLESS STEEL CORED WELDING WIRE E317LT1-1 CLASSIFICATION: There are ones with diamet... |
 |
Mini Jewelry Laser Repair System – 60W to 400W Precision Welding | Seller: Beijing JCZ Technology Co., Ltd | The Mini Jewelry Laser Welding Machineis an advanced mini laser welding system engineered for pre... |
 |
Portable Backpack Laser Cleaning Machine – Lightweight, Efficient Rust & Paint Removal | Seller: Beijing JCZ Technology Co., Ltd | TheHCP-M SeriesBackpack Laser Cleaning Machinefeatures a compact pulsed fiber laser system, desig... |
