Fabric liquid penetration tester

• 

Main Parameters

1. The penetrating disc is made of special organic glass through special processing, ensuring a weight of 500 grams ± 5 grams.

2. Large-capacity burette, greater than 100 ml.

3. Moving stroke of the burette: 0.1 - 150 mm.

4. Moving speed of the burette: approximately 50 - 200 mm/min.

5. Liquid flow rate: controlled to pass through 80 ml within 6 seconds, with an error less than 2 ml.

Main Features

1. The whole machine is processed with high-quality metal spray paint.

2. The specimen platform is made of imported special aluminum profiles, featuring light weight, smooth surface, and rust resistance.

3. Made of imported special aluminum brushed panel with metal buttons.

4. Equipped with an imported meter head.

5. The penetrating disc is equipped with a precision positioning device.

6. The specimen clamping can directly lift the penetrating disc and is equipped with positioning and fixing devices.

7. The electrode of the penetrating disc is made of special platinum wire material.

8. The penetrating disc is equipped with a quick connection interface, which can conveniently replace additional penetrating discs.

9. The liquid release is equipped with an automatic release device, enabling automatic control.

Test Procedure

1. Place the liquid penetration tester on a stable test bench and adjust the instrument to be level, making the whole instrument as horizontal as possible. Connect the power cord at the back of the box to the power socket and connect the grounding wire to the grounding terminal on the back of the box. Connect the plug of the penetrating disc electrode to signal connector 1 on the instrument control box and the plug of the solenoid valve to signal connector 2. After preparing the instrument, turn on the power switch on the instrument panel.

2. Prepare the consumables for the test, such as experimental liquid (simulated urine), test samples, absorbent paper for testing, etc.

3. **Step 1**: Cut a specimen of 125 mm × 125 mm and condition it according to the standard requirements. Place the standard absorbent pad and the specimen from bottom to top in the specimen positioning disc (the side of the specimen that contacts the skin facing up).

4. **Step 2**: Loosen the funnel positioning screw, adjust the height of the funnel so that the distance between the nozzle of the funnel and the top surface of the specimen is 30 mm, and then tighten the positioning screw.

5. **Step 3**: Place the penetrating disc on the specimen (ensure that the penetrating disc is clean to avoid affecting the test results), and make sure that the center of each disc is concentric with the center of the funnel during the placement process.

6. **Step 4**: Use a syringe to draw 5 ml of liquid and drop it into the funnel. Press the start switch button on the panel, and the solenoid valve of the funnel opens, allowing the liquid to flow into the circular cavity of the penetrating disc.

7. **Step 5**: After the liquid flows into the circular cavity of the penetrating disc, connect the electrode. The timer automatically starts timing. When all the liquid seeps into the standard absorbent pad and the liquid level drops below the electrode, the two electrodes are disconnected, and the timer stops timing. Read the time recorded by the timer, which is the penetration time.

8. **Step 6**: Replace the standard absorbent pad and the specimen, and repeat steps 4 - 10 of the determination of the liquid penetration time until all specimens are tested.

9. **Step 7**: After the determination of the liquid penetration time (simulated urine) for the entire test is completed, promptly clean up the liquid in the positioning disc and turn off the power.

10. After the experiment, be sure to clean the instrument and carefully wash the experimental funnel, pipeline, load platform and other key components with clean water to ensure the accuracy of the instrument.

Other supplier products

	Plastic Pipe Hydrostatic Pressure Burst Tester	Standard ISO 1167: For thermoplastics pipe systems under constant internal pressure. ASTM D 1598: Standard test method for time-to-failure of pla...
	Textile Bonded Door Drench Tester	I. Product Overview TheTextile Bonded Door Drench Testeris a specialized instrument designed to evaluate the water resistance and durability of te...
	Tank Washing Machine for Cleaning Marine Application	High impact 3D rotary tank washer Model number: STD30 tank washing machine Working Principle: Automotive and set by free, XCJ30 tank washing mac...
	Footwear Dynamic Waterproof Tester	Product Introduction: It is used to test the dynamic waterproof performance of various finished shoes, and the number of times when no water enter...
	Dynamic mechanical torsional braid analyzer	Product Introduction： Dynamic mechanical torsional braid analysis apparatus adopts computer-controlled digital technology.The test principle of th...

Same products

	ISO 29463 HEPA/ULPA filter performance testing System	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The system supports and compli...
	High-Precision ISO 16890 Filter Media Test Rig for R&D and QC	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The system can execute and com...
	Mobile Floor Scrubber Aging Life Tester IEC 60312	Seller: Standard Groups	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com TheMobile Floor Scrubber Aging L...
	ISO 12103 Cleanable Filter Media Test System	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The system complies with: (1)...
	Robotic Vacuum Cleaners Edge-Following Tester	Seller: Standard Groups	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com TheEdge-Following Test Equipment...