KES - QM Contact Coolness Tester
It is used to measure and evaluate the contact coolness index "q max" (peak heat flux). When the skin comes into contact with fabrics, different amounts of heat are transferred, resulting in varying coolness sensations. This instrument can be used to evaluate fabrics with a cooling sensation in summer, as well as underwear fabrics with a contact cooling sensation in winter, and so on. In terms of features: It is designed by simulating the human touch feeling, which enables more accurate measurement of the maximum heat transfer amount. It also has the option to measure thermal conductivity and thermal insulation. For the measurement of thermal conductivity, the heat transfer performance is measured through the sample between hot plates with a fixed temperature difference. For the measurement of thermal insulation, the sample is placed on a hot plate with a fixed temperature, and the thermal insulation rate is calculated according to the heat loss of the sample. There are two measurement methods: the dry method and the wet method. The measurement cases cover various evaluations, such as the coolness of mattresses and the cooling sensation of cooling patches. It is equipped with a touch screen for data display and can automatically perform continuous measurements 10 times in a single test, which improves the measurement accuracy. It complies with multiple standards, including GB/T 35263 - 2017. It can also be connected to a PC for data output (optional). The qmax value is displayed using dedicated software, and the data is saved in CSV format, making it convenient for export and use.
Other supplier products
|
|
Toilet Paper Dispersibility Tester |
Product Introduction:
G354B toilet paper dispersibility tester is a test instrument used to test the dispersibility of toilet paper, dispersibilit... |
|
|
seat foam compression hardness tester-QINSUN |
Applicable standards:
GB/T 6670-2008"Determination of falling ball resilience of soft foam polymeric materials" : This standard specifies the test... |
|
|
AATCC Gray Scale for Color Change |
Applicable Standards
The AATCC Gray Scale aligns with international colorfastness evaluation protocols, including:
AATCC Evaluation Procedure... |
|
|
Fogging Tester |
Standards
DIN 75201: Automotive trim material fogging resistance.
ISO 6452: Coated fabrics fogging behavior in vehicle interiors.
SAE J1756: A... |
|
|
Voltage Drop Tester for Automotive Wire Connectors |
The voltage drop tester for automotive wire connectors is suitable for measuring the voltage drop at similar connection interfaces such as the pi... |
All supplier products
Same products
