Fabric Anti-Electromagnetic Radiation Performance Tester

Standards

GB/T23326. GB/T25471. ASTM D4935. SJ2054

Application

It is used for testing the electromagnetic shielding effectiveness of electromagnetic shielding materials such as textiles, plastic sheets, metal foils, surface coatings or platings of non-conductive materials, metal meshes, conductive films, conductive glasses, and conductive medium plates (using the coaxial method).

Features

1. The instrument adopts the coaxial test method, with good transmission characteristics and high testing accuracy.

2. It can perform full-frequency scanning, list scanning, and point-frequency measurement.

3. It uses the internationally preferred coaxial test method to measure the shielding effectiveness of materials, with good transmission characteristics and improved testing accuracy.

4. The instrument automatically controls the emission and reception of signals, automatically collects and processes data, displays curves on the LCD screen, and prints test data with a micro printer, which is easy to operate.

5. The evaluation of the absorption and reflection performance of planar materials against electromagnetic waves can be obtained by calculating the measured parameters.

6. RS232 data interface, with computer software for curve display, data analysis, and storage.

7. It provides a USB interface and supports mobile data storage with a USB flash drive.

Technical Parameters

1. Signal Source:

1.1 Test frequency range: 300 KHz - 3000 MHz

1.2 Frequency stability: ≤ ±5×10⁻⁶

1.3 Frequency resolution: 1 Hz

1.4 Signal purity: ≤ -65dBc/Hz (at 10 KHz offset)

1.5 Output level: -45dBm - +10 dBm

1.6 Level accuracy: ≤ ±1.5dB (25°C ± 5°C, -45dBm - +5 dBm)

1.7 Harmonic suppression ratio: ≥30dB (1MHz - 3000MHz), ≥25dB (300KHz - 1MHz)

1.8 Directivity: ≥50dB (after vector calibration)

1.9 Power scanning: -8dBm - +5dBm

1.10 System impedance: 50 ohms

2. Receiver:

2.1 Frequency range: 300KHz - 3000MHz

2.2 Resolution bandwidth: 100 Hz - 20 KHz

2.3 Dynamic range: ≥95 dB (RBW = 1 KHz)

2.4 Maximum input level: +10dBm

2.5 Input damage level: +20dBm (DC +25V)

2.6 Port: Standing wave ratio ≤1.2

3. Phase Characteristics:

3.1 Phase resolution: 0.01°

3.2 Phase trajectory noise: 0.5° @ RBW = 1KHz, 1° @ RBW = 3KHz (25°C ± 5°C, 0dBm)

4. Transmit and Receive Frequencies:

4.1 Transmit frequency: 20MHz - 1.3GHz

4.2 Transmit frequency drift:<1000Hz

4.3 Minimum hopping interval of transmit frequency: 1MHz

4.4 Transmit output power: >13dBm

4.5 Receive power dynamic range: +5dBm - -55dBm

4.6 Receiver power accuracy: ±1dB

4.7 Resolution: 0.01dB, receiver frequency test range: 10MHz - 3GHz

4.8 Double-layer shielding effectiveness: >20dB

5. Specimen Dimensions:

5.1 Circular: Diameter 180mm - 200 mm

5.2 Square: 180mm×180mm - 200mm×200mm

5.3 Specimen thickness: 0 - 5mm

6. Instrument Specifications:

6.1 Working environment temperature and humidity: 0 - 40°C, 0 - 75%RH

6.2 Power supply: AC220V ± 30V, 50Hz, 100W

6.3 Overall dimensions: 70mm×50mm×75mm (L×W×H) (excluding computer)

6.4 Weight: Approximately 75kg

Optional Instrument Configurations

1. One main unit

2. One branded computer

3. One branded printer

Other supplier products

	Vertical Flammability Tester	IntroductionVertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwear, fabrics, other textile materials o...
	Nissan 4-Station Abrasion Tester for Multi-Material Durability Tester-QINSUN	Standard ASTM D3884(Standard Guide for Abrasion Resistance of Textile Fabrics) ISO 5470-1(Rubber- or Plastics-Coated Fabrics - Abrasion Resistanc...
	MST Medical Compression Stocking Tester	Product Overview TheMST Medical Compression Stocking Testeris a specialized instrument designed to evaluate the compression performance, elasticit...
	Car seat static strength tester	Applicable standards: GB 11550-2009"Car seat headrest strength requirements and test methods" : This standard specifies the static strength test r...
	Dry Cleaning & Washing Cylinder	Introduction The dry cleaning and washing cylinder consists of a stainless steel rotary test chamber and a multi-speed drive with a digital timer....

All supplier products

Same products

	Air Intake Filter Test System	Seller: Standard Groups	The Air Intake Filter Test System is designed for testing industrial air filters and engine air f...
	Mattress Spring Fatigue Tester，ASTM D3574 ，how to test mattress for sagging	Seller: Standard International Group (HK) Limited	The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed f...
	Mattress Rollator，ASTM F1566 ，Mattress Durability Tester，Mattress Fatigue Tester	Seller: Standard International Group (HK) Limited	The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-ter...
	HD2 Pneumatic Foam Fatigue Tester，ISO 3385，Foam Fatigue Testing Machine	Seller: Standard International Group (HK) Limited	The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine ...
	VW Heel Abrasion Tester，ISO 4649 ，Heel Performance Testing Machine	Seller: Standard International Group (HK) Limited	The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materia...