Ozone aging chamber

Brief Introduction

The textile ozen aging color fastness tester is mainly used for testing color fastness properties of fabrics exposed to ozone environment; it is the special equipment for testing the fabric colorfastness to ozone.

Standards

AATCC 109-2011 Colorfastness to Ozone in the Atmosphere under Low Humidities.

AATCC 129-2011 Colorfastness To Ozone In The Atmosphere Under High Humidities

ISO 105-G03-1993 Textiles; tests for color fastness; part G03: color fastness to ozone in the atmosphere

GB/T 11039.3-2005 Textiles; tests for color fastness; part 3: color fastness to ozone in the atmosphere

JIS L0890 Test methods for color fastness to ozone

ASTM D1149,

ASTM D1171,

IS0 1431,

DIN 53509,

JIS K 6259,

GB/T 13642,

GB/T 7762-2003,

GB 2951, and

IEC 60811-2-1.

Product Description

1. Equipped with a high efficiency ozone generator. It is also equipped with HMOS sensor, ozone concentration of 5ppm, control accuracy of ± 20%, with a durable ccounters. When the tank is full load for test, the ozone concentration can reach 5ppm in about five minutes;

2. Stainless steel test chamber is equipped with a large UV glass observation window, and can acheive closed-loop control of the ozone concentration.The rotating sample holder can hold up to 24 samples. The automatic shut-off featured LED lights improve the observance of the test effect;

3. In order to improve the safety performance of the device, it is equipped with door safety interlock,ozone decomposition catalyst and exhaust design with negative pressure monitoring;

4. The user can conduct on-site calibration each year, and the sensor can also be returned to the factory for calibration. Two calibration standards have NIST traceable calibration. The equipment also has periodic reminders to alert users to replace ozone decomposition catalyst and ozone generator.

Application

It is suitable for a series of tests on color fastness and color fastness to airborne contaminants, such as knitted fabrics, woven fabrics, synthetic fiber fabrics, natural fiber fabrics, etc. It can also be used for the ozone color fastness test of fabrics such as nylon carpet.

Features

· Multi-functional rotating sample rack supports hanging and placing samples in various ways to meet the test requirements of samples in different shapes and specifications. Sample rack speed is adjustable.

·High output ozone generator with closed-loop ozone concentration control system and easy parameter setting panel provides a powerful control function and accurate test results.

·Transparent window with internal lighting system provides convenience to observe the test process. The security door lock ensures test safety.

Structure

1. The apparatus consists of an ozone generator, fans, baffles, sample holder and the sample compartment composition. The use of high-voltage transformer ozone generator discharge through the grid, the generator is placed in front of the low pressure fan, anozoneseparator system injects ozone into the test chamber. Sample holder mounted on the wire can be applied to samples of various sizes.

2. The device is equipped with high-efficiency ozone generator, controller, closed-loop control of ozone concentration and can accommodate 24 rotating sample holders. Thepre-setparameters can be displayed on the screen , thereby increasing the accuracy of the device operation and test results.

Technical Parameters

Items	Parameters
Temperature Range	10℃-50℃
Temp Accuracy	±1.0℃
Humidity range	50-90% RH
Humidity accuracy	±3%
Ozone concentration range	0-500pphm
Adjust method	flow regulation
Ozone generation	Static air emissions
Internal dimension	400mm x 400mm x500mm
Power supply	220V，50Hz or115.60Hz
External dimension	1000mm×650 mm×1450 mm
Weight	95KG

Other supplier products

	Water injection counterweight dummy | Testing Equipment	Product Introduction This counterweight dummy can be filled with water, the torso and the bottom are separated, independently filled with water o...
	fingertip hand abrasion tester	Functionality of a product is considered as a matter of course, so the perception of quality is determined primarily by the visual appearance. Dam...
	Reciprocating Wear Tester	Reciprocating wear Tester - Characteristics evaluation of the material wear resistance, scratch resistance and rub resistance and others Fix the p...
	Tracking Index Tester	Leakage Current Tracking Tester is designed to evaluate the tracking resistance of solid electrical insulating materials under humid conditions. By...
	Schopper Abrasion Tester manufacturer	Standards DIN 53863. Part 2: Abrasion test methods for textile fabrics (rotary abrasion test). GME Standard 60345 & GMW Standard 3283: Indust...

All supplier products

Same products

	Air Intake Filter Test System	Seller: Standard Groups	The Air Intake Filter Test System is designed for testing industrial air filters and engine air f...
	Mattress Spring Fatigue Tester，ASTM D3574 ，how to test mattress for sagging	Seller: Standard International Group (HK) Limited	The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed f...
	Mattress Rollator，ASTM F1566 ，Mattress Durability Tester，Mattress Fatigue Tester	Seller: Standard International Group (HK) Limited	The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-ter...
	HD2 Pneumatic Foam Fatigue Tester，ISO 3385，Foam Fatigue Testing Machine	Seller: Standard International Group (HK) Limited	The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine ...
	VW Heel Abrasion Tester，ISO 4649 ，Heel Performance Testing Machine	Seller: Standard International Group (HK) Limited	The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materia...