Footwear Stiffness Rigidity Tester

• 

Torsional stiffness is a measure of the resistance to twisting of footwear about its longitudinal axis. The footwear is clamped in the toe area, forces are applied through the heel clamp such that the heel and backpart is twisted first inwards and then outwards up to a maximum angle. The torque required to achieve the twist is used to calculate the torsional stiffness values.

Application

It is the tester used to test stiffness of the outsole.fix the toe part of finished shoe with a solid body by the fixture and increase the force under requested speed ,inspect the bendng angle of the outsole ,then decide if it is necessary to do Bending Test according to the angie.

Technical parameter

Operation procedure

1.Turn on the power, press the "Down" button, let the moving board back to 0-bit.

2. Install the sample (shoe or shoe sole), and place the zigzag line of the sample on the rotating shaft to compress the toe cap;

3. Press the “clear” button on the display to display 0.00 kg on the display.

4. Press the "Up" button, the table to the specified speed (100±10mm/min) gradually increase the force to 3kg or the active plate bends to 90°, the instrument will automatically stop. At this point, we can look at the angle of the pointer readings, according to which we decide whether it is to do the folding test;

5. When we measure the rigid angle of the shoe, press the "Down" button again to return the movable panel to zero (level). Repeat the above steps for a sample test;

6. After testing, please turn off the power.

Attention matters

1. The instrument must be reliable grounding

2. regularly in the activities of the instrument to add embellish oil to protect the flexibility of the use of equipment

3. The instrument must be used by special personnel

4. External power supply: ac220v.

5. Power: 100W

Other supplier products

	Rubbing Color Fastness Tester manufacturer	Introduction Manual friction fastness tester is the most commonly used instrument for the textile industry to detect the color fastness of the...
	Spray Rating Tester	Applications Spray Rating Tester is used to determine the surface wetting resistance of fabrics. Standards ISO 4920:2012: Textiles—Determi...
	Building material flame retardancy test furnace	Technical parameters: Gas used: methane flow rate （35 ± 0.5）L/min, its purity is greater than 95%, air flow rate （17±0.2）L/min Spec...
	General Ventilation Filter Test Stand - Test Equipment	Application The Filter Test Platform is designed for testing air filters in compliance with European and international standards. It is suitable f...
	Dry Cleaning & Washing Cylinder - Test Equipment	The dry cleaning and washing cylinder consists of a stainless steel rotary test chamber and a multi-speed drive with a digital timer. It is used t...

Same products

	Blanket Flammability Test Machine	Seller: Standard Groups	Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ...
	High Temperature Oxygen Index Tester	Seller: Standard Groups	The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125...
	Limiting Oxygen Index Tester	Seller: Standard Groups	The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb...
	Vertical Flammability Tester	Seller: Standard Groups	Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe...
	45 Degree Flammability Tester	Seller: Standard Groups	Application 45 Degree Flammability Tester is used to determine the burning characteristics of te...