Contact heat transmission test machine
Get a quote：
Whats/App: +86 185 0176 3615
Web: qinsun-lab.com
Email: serving@qinsun-lab。com
This part of ISO 12127 specifies a test method designed to evaluate the heat transfer and the behaviour ofmaterials used for protective clothing when such materials are struck by high temperature metal particles,especially when these are trapped in the folds of the garment in working saituations.
Standard:
ISO 12127-2
Technical Parameters
1. The equipment consists of Heating oven, controlcabinet and stainless steel test bench.
2. The falling of steel cylinder, is controlled by motor and slide plate is controlled automatically, so that the steel cylinder falls automatically.
3. K type thermocouple with a diameter of 1.5mm and a temperature measurement of 0.1 ºC.
4. The Muffle furnace is used in the heating ovento control the heating temperature above 800 ºC.
5. Before the test, the temperature of calorimeter should be reduced to (20 ± 1) ºC.
6. Equipped with twoweights, the weight is (175 ± 5) g.
7. The timing range of the timer is 0-9999s, and the timing accuracy is 0.1s.
8. The dimensions of the copper disc are: diameter (8 ± 0.02) mm and the thickness (1.7 ± 0.02) mm.Comprising a K-type thermocouple inserted into the copper disc. Testing range≥1000ºC.
9. Support block for the specimen and calorimeter , made of a curved aluminium sheet and fitted on a plastic base element.
10. Steel cylinder: Diameter: Ø 6.0 mm ± 11 µm ,Height: 12 mm ± 11 µm,Mass: 2.6 g ± 20 mg.
11. Sample diameter:(180*25)mm.
12. PLC and touch screen control system.
13. PID intelligent control, the system automatically collects temperature data (including start temperature, maximum temperature, temperature difference △ T, real-time temperature).
14. The test data is calculated and stored automatically.
15. Dimension:1800mm x 600 mm x 800mm.
16. AC 220V 50/60Hz, 6000W.
17. Manual andcertificate of quality are provided.
Send product request
Other supplier products
 |
Mattress Rollator | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Email: serving@qinsun-lab。com The mattress roller is tested by rolling a 240-poun... |
 |
Textile moisture absorption and heat generation performance tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Textile Moisture Absorption and Heat Generation Performance Tester is a profes... |
 |
High-Low Temperature Gravel Impact Tester | This tester is widely applied in durability and damage resistance evaluation for materials exposed to gravel impact during actual service condition... |
 |
Taber Abrasion Resistance Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Taber Abrasion Tester is also referred to as Taber abraser or Taber abrader, which... |
 |
High-efficiency Filter Test Bench| Testing Equipment | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Introduction The high-efficiency filter scanning test bench (referred to as the t... |
Same products
 |
Tabletop Xenon Arc Weathering Tester (SunMaster) | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Water-Cooled Xenon Lamp Weat... |
 |
Blow-By Test Rig | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Test system for the characterisa... |
 |
Air filter System（ISO 16890/EN 779） | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Filter test system for general a... |
 |
Oil Thread Leak Test System | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Test System for oil thread leak ... |
 |
Manual HEPA/ULPA Filter Scanning Test System | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Manual HEPA/ULPA Filter Scan... |
