Building products ignitability Apparatus

• 

This apparatus is manufactured to conform to ISO 5657.The Apparatus has been designed,principally for testing building materials and composites, but it is capable of testing anysample of size 165mm × 165mm and up to a maximum of 70mm thick. The Apparatus measures

the ignition characteristics of exposed surfaces of essentially flat materials andspecimens.

Standards

ISO 5657

GB/T 14523

Specification

1.The radiation cone is made of 304 stainless steel;

2.All internal fixtures are made of stainless steel;

3.The specimen support frame: thickness 1.5mm,

4.The calibration board is made of ceramic fibre of density (200土50)kg/m3. with sidesmeasuring 165 mm and of thickness not less than 20 mm.

5.The rated power of the conical heater is 3000W, the heat output is 0-70kw / m2. and theresolution is 0.5kw/m2;

6.Thermocouple has automatic cold node compensation.

7.The Medtherm heat flux meter imported from the USA with a water cooling system. Accuracy± 3%, reproducibility deviation 0.5%;

8. Ignition device: automatic ignition.

9.Imported gas flowmeter, control of gas flow precisely

10.Install filter in propane gas path; prevent pollution test gas path system;

11.Equipped with check valve to prevent danger;

12.PLC&touch screen automatic control system;

13.Temperature monitor 0 ℃ ~ 1000 ℃; control heater temperature resolution ± 2 ℃;

14.Nominal range of balance 5000g, accuracy 0.1g;

15.The test data is automatically recorded and automatically saved;

16.The exaust hood is optional.

Other supplier products

	Aerosol Foams Flammability Tester	Product Introduction This product complies with "Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria" 31.6 Flammabi...
	Safety Helmet Lateral Rigidity Tester	The Safety Helmet Lateral Rigidity Tester is a precision instrument designed to evaluate the lateral deformation resistance of helmets under contro...
	Flatbed Ironing Tester	TheFlatbed Ironing Testeris a precision instrument designed to evaluate fabric performance under simulated ironing conditions. It measures heat res...
	Rubbing Color Fastness Tester | Testing Equipment	Manual friction fastness tester is the most commonly used instrument for the textile industry to detect the color fastness of the fabric to dry and...
	JIS Rubbing Colour Fastness Tester - Test Equipment	TheJapanese Standard Color Fastness to Rub Tester (Gakushin)is a specialized instrument designed to evaluate the colorfastness of textiles to frict...

Same products

	Blanket Flammability Test Machine	Seller: Standard Groups	Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ...
	High Temperature Oxygen Index Tester	Seller: Standard Groups	The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125...
	Limiting Oxygen Index Tester	Seller: Standard Groups	The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb...
	Vertical Flammability Tester	Seller: Standard Groups	Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe...
	45 Degree Flammability Tester	Seller: Standard Groups	Application 45 Degree Flammability Tester is used to determine the burning characteristics of te...