UV-master
In response to the climate resistance testing requirements for outdoor textiles, this equipment can simulate outdoor climate conditions and accelerate testing. Textiles may undergo yellowing, decline, and structural changes under the stimulation of outdoor ultraviolet radiation.
UV testing is conducted by exposing materials to high temperature control conditions and alternating cycles of ultraviolet light exposure and humidity UV uses fluorescent ultraviolet lamps to simulate sunlight, and simulates dew and rainwater through condensation or water spraying. The aging types of textiles include discoloration, loss of luster, powdering, cracking, foaming, brittleness,decline, oxidation, etc
Standards:
ASTM G151 ASTM D4329 D4329 ASTM-D4587.ASTM-G154
Technical parameters:
1. Blackboard temperature setting range:BPT 40-110 ℃; BST 40-120 ℃, but the actual temperature limit of the temperature protection device inside the machine is93 ℃± 10%.
Blackboard temperature control accuracy:± 2 ℃.Blackboard temperature sensors are consumables that require frequent wiping. The surface paint may peel off after a certain period of time, affecting the control accuracy. Therefore, if there is a significant change in color, it needs to be replaced. The specific time depends on the usage situation, usually around two years.
2. Sample size: 48 standard samples of75 * 150mmcan be placed;
3. Sample thickness: The sample thickness shall not exceed 10mm
4. UV wavelength:UVA-340
5. Simulated condensation: The condensation system time can be adjusted
6. Test time: adjustable from0 to 9999
7. Irradiance: adjustable from0 to 1.6w/m2
8. Test time: It can continuously accumulate test time without resetting due to power outages or other factors
9. Irradiance calibration: The irradiance can be calibrated at any point within the set range without changing the program being executed
10. Calibration process: The calibration process achieves automatic input correction to avoid errors caused by manual input
11. UV state, no water, operable
12. Sample space: Large sample space, can be equipped with 3D sample racks
13. Experimental status data can be transmitted through Ethernet cables
14. Lamp lifespan: UV lamp lifespan can reach over 5000 hours
15. Compliant with standards:ASTM G151 ASTM D4329 D4329 ASTM-D4587.ASTM-G154
Send product request
Other supplier products
 |
Seat foam compression hardness tester | The Car Seat Foam Performance Tester is a professional testing system designed to evaluate the mechanical properties of automotive seat foam, inclu... |
 |
Textile Far - Infrared Radiation Heating Tester - lab instrument | With the continuous advancement of technology, new types of fibers and textile products have emerged, leading to increasingly high demands on texti... |
 |
Gravel Resistant Impact Tester | The Gravel Resistant Impact Tester/Stone Chip Tester is specifically designed for gravel impact testing of automotive materials and surface coating... |
 |
Automatic dry cleaning tester - Test Equipment | Instrument Purpose The YG-6 Fully Automatic Dry Cleaning Tester is used to evaluate the physical properties of wool, fur, cotton-linen, worsted, a... |
 |
Yarn Twist Tester | Application ScopeThe yarn twist tester is an instrument used to measure the twist of yarns and their related technical indicators.Applicable Standa... |
Same products
 |
Air Intake Filter Test System | Seller: Standard Groups | The Air Intake Filter Test System is designed for testing industrial air filters and engine air f... |
 |
Mattress Spring Fatigue Tester，ASTM D3574 ，how to test mattress for sagging | Seller: Standard International Group (HK) Limited | The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed f... |
 |
Mattress Rollator，ASTM F1566 ，Mattress Durability Tester，Mattress Fatigue Tester | Seller: Standard International Group (HK) Limited | The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-ter... |
 |
HD2 Pneumatic Foam Fatigue Tester，ISO 3385，Foam Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine ... |
 |
VW Heel Abrasion Tester，ISO 4649 ，Heel Performance Testing Machine | Seller: Standard International Group (HK) Limited | The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materia... |
