Air Intake Filter Performance Test System
The Air Intake Filter Test System is designed to evaluate the filtration performance, airflow characteristics, and dust holding capacity of air intake filters used in engines and industrial systems. The system fully complies with international standards such as ISO 5011, SAE J726, and GB/T 12485, providing accurate and repeatable results for both research and production quality control.
Applications
This test system is widely used for:
Performance evaluation of automotive air filters, industrial air filters, and engine intake systems.
R&D testing for new filter products and materials.
Quality inspection and certification by third-party laboratories.
Comparison and validation between domestic and international filter brands.
Conforming Standards
The system meets multiple global standards:
ISO 5011: Inlet air cleaning equipment for internal combustion engines and compressors.
SAE J726: Air cleaner test code for automotive and diesel engine filters.
GB/T 12485: Test methods for air cleaners used in internal combustion engines.
ISO 12103-1: Test dusts (A2 Fine and A4 Coarse) used for efficiency and dust holding capacity evaluation.
Key Test Procedures and Parameters
1. Restriction and Differential Pressure Test
Purpose: Measures resistance variation at different airflow rates to generate the pressure drop-airflow curve.
Method: Five flow rate points (50%–150% of rated flow) are selected; corresponding pressure drops (ΔP) are recorded.
Application: Evaluates airflow capacity and ensures the filter does not excessively restrict engine intake.
2. Initial Efficiency Test
Purpose: Determines the filter’s ability to capture dust particles at the start of operation.
Method:
Uses A2 Coarse or A4 Fine dust.
Introduces either 20 g of dust or a mass equivalent to six times the rated airflow (m³/min).
Calculates efficiency based on dust captured by the test filter and absolute filter.
Application: Assesses initial filtration performance of new filters.
3. Full-Life Efficiency Test
Purpose: Measures filtration efficiency over the filter’s entire service life.
Method:
Dust is fed continuously until the filter reaches its final restriction (e.g., 2.5 kPa).
Cumulative filtration efficiency is calculated throughout the process.
Application: Simulates real-world filter lifespan and clogging behavior.
4. Incremental Efficiency Test
Purpose: Evaluates filter performance at multiple loading stages.
Method: Efficiency is measured at 10%, 25%, and 50% of the pressure drop difference between the initial and final restriction.
Application: Helps analyze how filtration efficiency evolves over time.
5. Dust Holding Capacity Test
Purpose: Determines total dust mass retained in the filter before reaching the final restriction.
Method: The filter is weighed before and after testing to calculate total dust capacity.
Application: Evaluates filter longevity and maintenance intervals.
Send product request
Other supplier products
 |
Seat Ingress/Egress Simulation Tester - Test Equipment | 1. Product Overview The True Body Weight Ingress/Egress Tester is a specialized machine designed to evaluate either a complete automotive seating ... |
 |
Enamel Boiling Water Resistance Tester | The Enamel Boiling Water Resistance Tester is designed to evaluate the chemical attack resistance of enamel coatings under boiling water conditions... |
 |
Radiant heat drop tester | The tester is used for evaluating the combustion behavior of automotive interior components including dashboards, trim panels, door panels, seat fa... |
 |
Fogging Tester | Standards DIN 75201: Automotive trim material fogging resistance. ISO 6452: Coated fabrics fogging behavior in vehicle interiors. SAE J1756: A... |
 |
Full Vehicle Sunlight Simulation Test Chamber | Applications Full Vehicle Sunlight Simulation Test Chamber is designed to evaluate the aging performance of complete assemblies or entire vehicles... |
Same products
 |
Air Intake Filter Test System | Seller: Standard Groups | The Air Intake Filter Test System is designed for testing industrial air filters and engine air f... |
 |
Mattress Spring Fatigue Tester，ASTM D3574 ，how to test mattress for sagging | Seller: Standard International Group (HK) Limited | The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed f... |
 |
Mattress Rollator，ASTM F1566 ，Mattress Durability Tester，Mattress Fatigue Tester | Seller: Standard International Group (HK) Limited | The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-ter... |
 |
HD2 Pneumatic Foam Fatigue Tester，ISO 3385，Foam Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine ... |
 |
VW Heel Abrasion Tester，ISO 4649 ，Heel Performance Testing Machine | Seller: Standard International Group (HK) Limited | The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materia... |
