Oil mist separation efficiency test bench| Testing Equipment
Quality assurance and the development of filters/separators/collectors should ideally be conducted under test conditions relevant to the actual conditions encountered. Therefore, oil separators must be tested at high temperatures up to 120°C and, depending on the application type, at high pressures.
Using the modular test system HMT 1000. oil separators (e.g., for separating leaked aerosols in internal combustion engines or for separating oil mist downstream of compressors) can be characterized quickly and accurately, and successfully tested under real-world conditions via isothermal particle measurements up to 120°C:
• Staged separation efficiency
• Load/holding time
• Total separation efficiency/weight analysis
• Pressure loss
Due to the modular layout, individual components of the test bench, such as the high-resolution heated light scattering spectrometer, the heated dilution system KHG 10 D, and the heated aerosol generator PLG 2100. can be easily removed from the HMT 1000 and used for other applications, such as direct measurements on the engine.
At the heart of the HMT 1000 is the light scattering spectrometer, which is used to simultaneously and independently measure particle size and particle number (and thus concentration). With the Promo® 1000 H, very fast, clear, reproducible, and isothermal measurements are possible.
Standard
GB/T 6165-2021
Technical parameters
| Measurement range (size) | 0.18 – 40 µm |
| Volume flow rate | 1 – 25 Nm3/h, 1 – 85 Nm3/h (Other specifications available upon request) |
| External dimensions | Approximately 1.600•2.000•800 mm (H•W•D) |
| Differential pressure measurement | 0 – 5.000 Pa (ande auf Anfrage) |
| Aerosol concentration | Up to 107 particles/cm3. equipped with 2 KHG 10 D |
| Compressed air supply | 6 – 8 bar |
Advantages
Grading and Separation Efficiency and Feed Measurement and Evaluation
Isothermal and Isobaric Measurements
All Components Can Be Heated to 120°C
High Reproducibility of Test Methods
Internationally Comparable Measurement Results Due to the Widely Used Measurement System
Customer-Initiated Cleaning and Calibration
Easy to Operate; Even Untrained Personnel Can Quickly Use the Equipment
Modular Layout Offers Greater Flexibility
Validate the Functionality of Individual Components and the Entire System During Pre-Delivery Acceptance Testing and Upon Delivery**
Reliable Operation
Short Setup Time and Extremely Low Maintenance Costs
The Equipment Will Reduce Your Operating Costs
Send product request
Other supplier products
 |
Comprehensive Engine Oil Filter Test Bench | Application This test bench is designed for comprehensive evaluation of engine oil filters, including spin-on filters and filter bypass valves. It... |
 |
Yarn Loop Length Tester | Compliance Standards FZ/T 70001-2003. FZ/T 71004-2003 Scope of Application Determines loop length of various yarns and knitted loops. Verifies c... |
 |
Textile Flatness Tester - lab instrument | TheTextile Flatness Testeris a precision instrument designed to evaluate fabric surface evenness by quantifying thickness variation, weave irregula... |
 |
PV Light Induced Degradation (LID) Testing Chamber | The Light Decay Test Chamber is designed as an indoor exposure system, primarily used for standard module and cell degradation testing, module hot ... |
 |
Fabric ici pilling and snagging box | Applications A universal pilling and snagging tester drives system to rapidly repeat pilling or snagging on fabrics to generate normal wear on sam... |
Same products
 |
Air Intake Filter Test System | Seller: Standard Groups | The Air Intake Filter Test System is designed for testing industrial air filters and engine air f... |
 |
Mattress Spring Fatigue Tester，ASTM D3574 ，how to test mattress for sagging | Seller: Standard International Group (HK) Limited | The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed f... |
 |
Mattress Rollator，ASTM F1566 ，Mattress Durability Tester，Mattress Fatigue Tester | Seller: Standard International Group (HK) Limited | The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-ter... |
 |
HD2 Pneumatic Foam Fatigue Tester，ISO 3385，Foam Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine ... |
 |
VW Heel Abrasion Tester，ISO 4649 ，Heel Performance Testing Machine | Seller: Standard International Group (HK) Limited | The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materia... |
