Automatic Thermal Deformation Vicat Softening Point Tester
This machine is a non-metallic material testing instrument designed and manufactured according to the latest international standards and national standards. It is mainly used for non-metal such as plastic, hard rubber, nylon, electrical insulating materials, long fiber reinforced composite materials, high strength thermosetting laminates. Determination of the heat distortion temperature of the material and the Vicat softening point temperature. It is easy to operate and precise in control. It is a highly intelligent test instrument widely used in colleges and universities, research institutes and product quality supervision and inspection units. It adopts single-chip control, PID phase-modulated output, with upper limit temperature setting, and automatically stops heating when the test temperature reaches the upper limit temperature..
Applications：
plastic, hard rubber, nylon, electrical insulating materials, long fiber reinforced composite materials, high strength thermosetting laminates.
Standard：
GB/T1633《Determination of vika softening temperature (VST) of thermoplastic》
GB/T1634《Determination of plastic load deformation temperature – part 1: general test method》
GB/T8802《Determination of softening temperature of plastic pipe fittings》
IS075-2013《Measurement of plastic load deformation temperature》
ASTM D 648《Test method for temperature of plastic thermal deformation》
ASTM D 1525《Plastic Vicat softening test method》
parameters:
| Temperature control range | ambient temperature~300ºC |
| Heating rate | (120±10)ºC/h (12±1)ºC/6min,(50±5)ºC/h (5±0.5)ºC/6min |
| Temperature indication error | 0.1ºC |
| Temperature control accuracy | ±0.5ºC |
| Maximum deformation indication error | ±0.001mm |
| Deformation measurement range | 0-10mm |
| Number of sample racks | 3 |
| The weight of the load bar and the tray | 76g |
| Test span range | 64 or 100mm according to the standard |
| Fuel tank volume | about 13L |
| Heating medium | methyl silicone oil |
| Cooling method | built-in active air cooling or external water cooling |
| Heating power | 2kw |
| Appearance size | length 65cm*width 46cm*height 84cm |
Send product request
Other supplier products
 |
Fabric Coolness Tester - Test Equipment | It is used to measure and evaluate the contact coolness index "q max" (peak heat flux). When the skin comes into contact with fabrics, different am... |
 |
Photovoltaic module outdoor exposure test system | The Photovoltaic Module Outdoor Exposure Test System is designed to simulate real-world environmental conditions for accelerated aging and performa... |
 |
Rubbing Color Fastness Tester | Testing Equipment | Manual friction fastness tester is the most commonly used instrument for the textile industry to detect the color fastness of the fabric to dry and... |
 |
Air Permeability Tester - lab instrument | Air Permeability Tester of textile fabrics complies with ASTM D737. ISO 9237/7231. BS 5636. etc. It is used to test the resistance of the flow of a... |
 |
Syringe piston thrust tester | The syringe piston thrust tester is a kind of high precision and high stability measuring equipment, which is used to measure the thrust of the syr... |
Same products
 |
Blanket Flammability Test Machine | Seller: Standard Groups | Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ... |
 |
High Temperature Oxygen Index Tester | Seller: Standard Groups | The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125... |
 |
Limiting Oxygen Index Tester | Seller: Standard Groups | The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb... |
 |
Vertical Flammability Tester | Seller: Standard Groups | Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe... |
 |
45 Degree Flammability Tester | Seller: Standard Groups | Application 45 Degree Flammability Tester is used to determine the burning characteristics of te... |
