Vehicle Cabin Air Filter Tester
The Vehicle Cabin Air Filter Tester is a precision instrument designed to evaluate the filtration performance of passenger compartment air filters used in automobiles. It measures particulate matter filtration efficiency, pressure drop, and dust holding capacity, providing accurate and repeatable data essential for product development, quality control, and regulatory compliance. The tester combines advanced aerosol generation, dust dispersion, and particle counting systems to simulate real-world operating conditions and capture reliable performance indicators.
Application
This tester is widely used in automotive R&D centers, filter manufacturing facilities, quality control laboratories, and third-party testing institutions. It is suitable for testing cabin air filters of passenger vehicles, commercial vehicles, buses, and specialized transport equipment. The instrument evaluates filter performance under controlled airflow, particle loading, and environmental conditions, providing insights into efficiency, airflow resistance, and dust holding capacity. It supports product validation, development of high-efficiency filters, compliance verification with international standards, and routine quality assurance in production lines.
Standards
The Vehicle Cabin Air Filter Tester is designed in accordance with the following standards:
(1) DIN 71460-1: Road vehicles – Air filters for passenger compartments of motor vehicles – Part 1: particulate matter filtration tests
(2) ISO/TS 11155-1: Road vehicles – Air filters for occupants’ compartments – Part 1: particulate filtration test
(3) GB/T 14295-2019: Automotive air filter performance testing
(4) GB/T 13554-2020: Road vehicle air filter testing methodology
Product Features
(1) Generates and controls airflow rates from 70 to 700 m³/h to simulate real operating conditions.
(2) Accurately measures pressure drop across the filter from 0 to 1000 Pa.
(3) Provides a filter adapter to securely mount filters up to 300 × 600 mm in size.
(4) Standardized test section of 180 cm² ensures consistent airflow distribution.
(5) Integrated environmental sensors continuously monitor temperature, relative humidity, and atmospheric pressure.
(6) Dust disperser (SAG 410/L) delivers controlled dust load from 2 to 245 g/h.
(7) Aerosol generator (ATM 220) produces test aerosols for precise performance evaluation.
(8) Electrostatic neutralizer (EAN 581) removes charges from aerosols to ensure measurement accuracy.
(9) High-precision particle counter (TOPAS spectrometer LAP321) measures particle size and concentration.
(10) Automated control and data acquisition system supports test sequences, real-time monitoring, and reporting.
Technical Parameters
| Parameter | Specification |
|---|---|
| Air Flow Rate | 70–700 m³/h |
| Pressure Difference | 0–1000 Pa |
| Filter Adapter Size | 300 × 600 mm |
| Test Section Cross-Section | 180 cm² |
| Environmental Sensors | Temperature, Relative Humidity, Atmospheric Pressure |
| Dust Disperser | SAG 410/L (2–245 g/h) |
| Aerosol Generator | ATM 220 |
| Electrostatic Neutralizer | EAN 581 |
| Particle Measurement | Laser aerosols, TOPAS spectrometer LAP321 |
| Power Supply | 400 V AC, 16 A |
| Test Bench Dimensions | 460 × 120 × 340 cm (L × W × H) |
Send product request
Other supplier products
 |
Rubbing Color Fastness Tester manufacturer | Introduction Manual friction fastness tester is the most commonly used instrument for the textile industry to detect the color fastness of the... |
 |
Veslic Colorfastness Abrasion Tester | 1. Function and Application The Veslic Colorfastness Abrasion Tester is designed to evaluate colorfastness under rubbing (crocking) conditions for... |
 |
Oil mist separation efficiency test bench | Quality assurance and the development of filters/separators/collectors should ideally be conducted under test conditions relevant to the actual con... |
 |
Comprehensive Engine Oil Filter Test Bench - lab instrument | Application This test bench is designed for comprehensive evaluation of engine oil filters, including spin-on filters and filter bypass valves. It... |
 |
Radiant heat drop tester | The tester is used for evaluating the combustion behavior of automotive interior components including dashboards, trim panels, door panels, seat fa... |
Same products
 |
Air Intake Filter Test System | Seller: Standard Groups | The Air Intake Filter Test System is designed for testing industrial air filters and engine air f... |
 |
Mattress Spring Fatigue Tester，ASTM D3574 ，how to test mattress for sagging | Seller: Standard International Group (HK) Limited | The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed f... |
 |
Mattress Rollator，ASTM F1566 ，Mattress Durability Tester，Mattress Fatigue Tester | Seller: Standard International Group (HK) Limited | The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-ter... |
 |
HD2 Pneumatic Foam Fatigue Tester，ISO 3385，Foam Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine ... |
 |
VW Heel Abrasion Tester，ISO 4649 ，Heel Performance Testing Machine | Seller: Standard International Group (HK) Limited | The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materia... |
