Finger Tip Abrasion Tester
The applied load is set using dead weights, and the scrub (abrading) distance is adjustable from 1 to 4 mm, allowing precise adaptation to different test materials and geometries. This tester supports a wide range of applications, including mechanical abrasion and chemo-mechanical testing when liquids such as artificial sweat, hydraulic oil, or cleaning solutions are applied to the test fabric.
Standard
(1) IEC 68-2-70 – Mechanical durability of materials via fingertip/hand simulation
(2) GB/T 2423 series – Environmental testing of electrical and mechanical durability
(3) IEC 60068-2-70 – Fingertip/hand friction durability testing
(4) IEC 60068-2-72 – Surface wear and operational lifetime testing of materials
(5) ISO 11998 – Coating scrub and abrasion resistance methods
(6) ISO 2813 – Surface state and gloss evaluation methods
Technical Specifications
| Feature | Specification |
|---|---|
| Test Method | Simulates fingertip contact abrasion |
| Standard Compliance | IEC 68-2-70 |
| Test Load | Variable from 1 N to 100 N (set with dead weights) |
| Stroke (Scrub Distance) | Adjustable from 1 to 4 mm |
| Test Pistons | 10 mm and 20 mm diameter silicone test pistons |
| Cycle Counter | Pre-set digital counter |
| Operation Modes | Mechanical abrasion and chemo-mechanical abrasion |
| Dimensions (Approx.) | 100 × 80 × 60 cm |
| Power Supply | 110 V / 60 Hz |
| Construction | Precision-machined components for repeatable operation |
| Control Interface | Manual adjustment and digital cycle control |
Send product request
Other supplier products
 |
Dry and Wet Retroreflectometer | The Dry and Wet Retroreflectometer, also known as the Dry and Wet Sand Abrasive Wear Testing Machine, is designed to evaluate the wear resistance o... |
 |
Shoe Sole Bending Tester | Footwear Manufacturing: Predicts degumming, cracking, or sole separation in sports shoes, casual shoes, and work boots. Quality Control: Validat... |
 |
EN20344 Sole Flexing Tester | Install the sole test piece on the EN sole flexing testing machine, so that the incision falls just above the center of the rotating shaft of the E... |
 |
Fabric Abrasion Tester | For fabric, wear resistance is a important indicator to evaluate its performance and durability properties. In the process, an abrasion material ma... |
 |
Five Fingering Scraper | Standards China: GB/T 2918, GB/T 6151, GB/T 8424.3 Europe: PV3952, BMW GS97034-2, BMW GS97034-9 North America: GMN 3943-2003, FLTM BN 108-13, ST... |
Same products
 |
Air Intake Filter Test System | Seller: Standard Groups | The Air Intake Filter Test System is designed for testing industrial air filters and engine air f... |
 |
Mattress Spring Fatigue Tester，ASTM D3574 ，how to test mattress for sagging | Seller: Standard International Group (HK) Limited | The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed f... |
 |
Mattress Rollator，ASTM F1566 ，Mattress Durability Tester，Mattress Fatigue Tester | Seller: Standard International Group (HK) Limited | The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-ter... |
 |
HD2 Pneumatic Foam Fatigue Tester，ISO 3385，Foam Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine ... |
 |
VW Heel Abrasion Tester，ISO 4649 ，Heel Performance Testing Machine | Seller: Standard International Group (HK) Limited | The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materia... |
