Cross Hatch Cutting and Adhesion Tester
The Cross Hatch Cutting and Adhesion Testing provides a relative movement of the scratch head to the surface of the material, and finally evaluates the sensory level of the scratch after scratching, the chromatic aberration of the scratched area and the unscratched area, or peeling condition of the surface coating of the sample after being scraped and adhered by tape, which is a common test instrument for evaluating the scratch resistance of the surface of the material and the coating. The good repeatability of the experimental data can help the manufacturer to effectively control the production and verify the performance of the product.
Application
It is suitable for testing automotive interior materials, plastics, rubber, leather, coated fabrics, coating materials, composite materials, paints, inks, soft metals and other industries. It is widely used in product quality control, new product development performance verification, testing mechanism testing and other fields.
It is applicable to the performance verification of new products, quality control of the production department, and the of material properties for the third-party testing organization, the product performance verification laboratory, and the quality and technical supervisiondepartment, etc.
Standards
PV 3952 Plastic interior parts scratch resistance test
Ford BN 108-03. 13 Scratch resistance test
BMW 0180. PA-P 028 Scratch resistance test (cross-cut method)
DAF KEUR 00824-401 Scratch resistance test (cross-cut method)
GME 60401 Scratch resistance test (cross-cut method)
GM 14829 Scratch resistance test (cross-cut method)
Jaguar-Landrover TPJLR.52.00 Scratch resistance test
GM N 14688 Scratch resistance test
8350Z-SDA-9000 Scratch test
NES M M0159 Polypropylene interior parts scratch resistant test
Features
Interchangeable multi-range weights
The instrument has a wide load range and can meet different standard tests. And also, the different pressurization loads can be customized according to customer' s requirements.
Simple and reliable sample fixation
The spinning type fixed sample enables that the sample is easy to install and not easy to slide, the replacement type stationary fixture is replaced according to the type and size of the friction head to meet a certain friction area.
Smart touch screen operation
The touch screen operation interface is simple and easy to use, and can be selected in both Chinese and English. It is convenient to select the stroke, speed, and scraping grid number, and can achievedifferent pressure tests at the same time.
Rail positioning
The device adopts guide rail transmission with high precision, low noise and long service life.
Multiple test suites
The flexible fixture can be interchanged with the imported friction head to meet different standards and different test requirements.
Technical Parameters
|
Test mode: automation |
Scraper head lift: pneumatic |
|
Test speed: 10-200mm/s |
Control screen: intelligent touch |
|
Number of scratches: it can be freely set |
Working station: single station |
|
Scratch head size: it can be interchanged |
Appearance size: 360mm*650mm*640mm |
|
Weight: 65Kg |
Power: 220V |
Test Procedure
Send product request
Other supplier products
 |
Micro Rapid Closed Cup Flash Point Tester(Pensky Martens) | Automatic Flash Point Tester designed for accurate and repeatable determination of the flash point of petroleum products using the Pensky-Martens c... |
 |
Artificial turf wear tester | Standard FIFA Quality Programme: Exceeds 2015/2016 handbook requirements for artificial turf abrasion resistance testing. EN 15330-1: European st... |
 |
UV Condensation Aging Test Chamber | Standard ASTM G154.ISO 4892-3.JIS K 7350. andSAE J2020for UV exposure testing. IEC 60068-2-78for condensation and humidity resistance evaluations... |
 |
Air Permeability Tester STD- F8 | The Air Permeability Tester is designed to quickly and accurately measure the breathability and permeability of a wide range of samples, from those... |
 |
Solids Spontaneously Igniting Tester | Product Description Conforms to the UN Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria 33.3.1.4 Test N.2: Test ... |
Same products
 |
Air Intake Filter Test System | Seller: Standard Groups | The Air Intake Filter Test System is designed for testing industrial air filters and engine air f... |
 |
Mattress Spring Fatigue Tester，ASTM D3574 ，how to test mattress for sagging | Seller: Standard International Group (HK) Limited | The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed f... |
 |
Mattress Rollator，ASTM F1566 ，Mattress Durability Tester，Mattress Fatigue Tester | Seller: Standard International Group (HK) Limited | The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-ter... |
 |
HD2 Pneumatic Foam Fatigue Tester，ISO 3385，Foam Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine ... |
 |
VW Heel Abrasion Tester，ISO 4649 ，Heel Performance Testing Machine | Seller: Standard International Group (HK) Limited | The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materia... |
