Five-Finger Scratch Tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Five-Finger Scratch Tester is a precision instrument designed to assess the scratch resistance of automotive interior materials, plastics, rubbers, leathers, coated fabrics, coatings, composites, paints, inks, and soft metals. By using five independently controlled scratch fingers with adjustable weights and interchangeable tips, you can accurately quantify surface wear caused by physical abrasion under controlled loads and motion. This system provides reliable, repeatable data for product development, quality control, and performance verification.
Applications
The Five-Finger Scratch Tester is suitable for testing automotive interior materials, plastics, rubber, leather, coated fabrics, coated materials, composite materials, paints, inks, soft metals, and other industries. It is widely used in product quality control, performance verification for new product development, and testing by inspection agencies. It is applicable for determining material properties in production department quality control, third-party testing agencies, laboratory product performance verification, and quality and technical supervision departments.
Standards
FORD FLTM BN 108-13 Scratch Resistance Test for Automotive Exterior Components (e.g., Painted Plastic Surfaces)
General Motors DMN 3943 Test Method for Scratch Resistance of Automotive Interior Materials
Daimler-Chrysler LP-463DD-18-01 Surface Scratch Resistance Test for Automotive Interior Component Materials
Features
1. Utilizes an LCD screen to control and display the testing process, allowing users to freely configure parameters such as test load, stroke, and movement speed according to requirements. The unique sample fixture design ensures secure clamping and convenient operation.
2. The equipment employs high-quality stepper motor control with guide rail transmission for both lateral and longitudinal movements. This design minimizes clearance, delivers smooth motion with low noise, achieves high testing accuracy, ensures excellent data repeatability, and extends the equipment's service life.
Parameters
| Item | Specifications |
|---|---|
| Test Mode | Automatic |
| Test Speed | 10–200 mm/s |
| Stroke | 10–200 mm |
| Number of Scratches | Configurable |
| Scratching Head Size | Interchangeable arbitrarily |
| Scratching Head Lifting | Manual |
| Control Screen | Intelligent touchscreen |
| Scratching Fingers | 5 pieces |
| Overall Dimensions (L×W×H) | 650mm×600mm×700mm |
| Weight | 45 kg |
Test Procedures
I. Preparation:
1. Inspect accessories: Ensure all components are present, including the scratching finger, weights, shaft rod, etc.
2. Secure Test Specimen: Place the test specimen flat on the testing platform and secure it with clamping blocks.
II. Installation and Parameter Setup:
1. Install Scratch Fingers: Attach scratch fingers (e.g., tungsten carbide tips) to the bottom of five independent shaft rods and hang weights.
2. Set Parameters: Configure test load (e.g., weight of weights), stroke distance, movement speed, and cycle via the LCD screen.
III. Test Execution:
1. Initiate Test: Activate the instrument. The guide rail begins transmission, and the scratching fingers scrape the sample surface back and forth according to preset parameters.
2. Observe the process: Ensure stable equipment operation during testing and avoid external interference.
IV. Conclusion and Analysis:
1. Stop the test: After the timer ends, the guide rail automatically stops. Raise the cross-axis support.
2. Remove the sample: Loosen the clamping block, remove the specimen, and inspect indicators such as scratch depth and width.
3. Evaluate data: Compare the scratch resistance of different specimens and analyze material properties.
Send product request
Other supplier products
 |
UV Accelerated Weathering Chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com Features and Benefits 1.In a relatively short time, the aging effect of the material expos... |
 |
Helmet Xenon Aging Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The helmet xenon lamp aging tester is a device that simulates the damage caused by long-ter... |
 |
Intramedullary Nails Internal-fixation Pull-out Force Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ASTM F543: Standard specification for metallic medical bone screws (dynamic loadi... |
 |
Battery Electrode Resistance Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ASTM B193: Standard Test Method for Resistivity of Electrical Conductor Materia... |
 |
Aircraft Seat Cushion Fuel Burn Test System for Aviation Safety | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The system is designed to support testing in accordance with the following aeros... |
Same products
 |
Laser Cutting Machines | Seller: Chanxan (Changshu) Laser Technology Co., Ltd. | Laser Cutting Machines PrecisionLaser Cutting Systemsfor Film, Glass & Industrial Materials ... |
 |
Precision Laser Micromachining Machine | Seller: Chanxan (Changshu) Laser Technology Co., Ltd. | Precision Laser Micromachining Machine| Ultrafast Laser Micromachining Systems Chanxan provides ... |
 |
Ultrafast Laser Systems | Seller: Chanxan (Changshu) Laser Technology Co., Ltd. | Ultrafast Laser Systems Femtosecond Laser System Ultra-precision femtosecond laser systemfor hi... |
 |
Industrial Laser Equipment Manufacturer | Seller: Chanxan (Changshu) Laser Technology Co., Ltd. | Industrial Laser Equipment Manufacturer for Precision Cutting, Marking & Micromachining Chan... |
 |
Common Rail Injector Valve F00R J02 012 | Seller: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
