Filter Media Test Rig According To ISO11057，air filter efficiency and pressure drop tester

The Filter Media Test Rig According to ISO 11057 is designed for reliable and repeatable testing of filter media under standardized conditions. It provides essential data on operational performance, separation efficiency, and particle emissions of filter media, supporting development, optimization, and quality assurance in production.

Application

(1) Filter Media Characterization: Performance testing of filter media according to ISO 11057.

(2) Dust Loading Testing: Evaluation of differential pressure under dust load.

(3) Separation Efficiency Assessment: Measurement of gravimetric and fractional filtration efficiency.

(4) Cyclic Aging Testing: Assessment of long-term cyclic performance of filter media.

(5) Small-scale Filter Testing: Testing small filters according to ISO 11057 standards.

(6) Quality Assurance: In-process and final control during production to ensure compliance.

Standards

The system supports and complies with:

(1) GB/T 14295-2019 – Air filters.

(2) GB/T 13554-2020 – High-efficiency air filters.

(3) GB/T 6165-2021 – HEPA filter performance: efficiency and resistance.

(4) ISO 11057 – Performance testing of cleanable filter media.

(5) ISO 16890 – Air cleaning filter performance.

(6) EN 779 – Performance standard for air filters.

(7) ASTM D6830 – Evaluation standard for air filters.

Parameters

Parameter	Unit	Value
Test Flow Rate	m³/h	0.5 – 5
Differential Pressure Range	Pa	Configurable per test condition
Power Supply	–	3 × 400 VAC, 16 A
Operating Gas/Air	–	Custom (Pural-NF, Pural-SB, DEHS)
Test Aerosol	–	Pural-NF, Pural-SB, DEHS
Temperature	°C	0 – 50
Relative Humidity	%	0 – 100
System Dimensions (W × H × D)	mm	Configurable per setup
Weight	kg	approx. 300

Features

Stable Dust Dose and Dispersion: Ensures reliable and repeatable test results.

Flexible Design: Supports future modifications and expansions.

Multiple Aerosol Options: Supports solid and liquid aerosols for different test conditions.

Optimized Component Matching: Ensures optimal performance within cost-effective range.

Full Computer Control: User-friendly software for automated operation.

Customizable Test Programs: Supports tailored test protocols for various scenarios.

Accessories

Accessory	Quantity
Aerosol Generator	1
Laser Aerosol Spectrometer	1
Pural-NF Dust	As required
Pural-SB Dust	As required
DEHS Dust	As required

Test Principle

Dust Loading Test: Measures differential pressure changes under dust load to determine operational capacity.

Gravimetric and Fractional Efficiency: Assesses filter performance using gravimetric and particle-size-dependent separation efficiency.

Loading Capacity: Determines maximum dust holding capacity for long-term stability.

Cyclic Aging Test: Measures performance after repeated loading and cleaning cycles to evaluate durability.

Operation Instructions

System Startup:

- Verify power, air supply, and aerosol generator.

- Configure test parameters (flow rate, differential pressure, aerosol type).

Testing Process:

- Install filter media in dedicated test fixtures.

- Start the test; system automatically measures differential pressure, efficiency, and loading capacity.

Data Recording and Reporting:

- System generates test reports automatically and stores data for traceability and quality control.

Experimental Procedure

Preparation:

- Configure test parameters (target efficiency, flow rate).

- Install filter media in fixtures.

- Check all equipment and aerosol generator operation.

Testing:

- Automated measurement of differential pressure, dust loading, and separation efficiency.

- Data is recorded continuously.

Result Analysis:

- System generates a detailed report including efficiency, pressure drop, and loading capacity.

Maintenance Information

Periodically check aerosol generator and particle measuring instruments.

Ensure calibration of sensors for accurate measurements.

Clean system components to maintain test accuracy.

Other supplier products

	Floor Caster Wear Test meter	Meet the standard: GB/T 11982.2. GB/T 4085. BS/EN 425. ISO 4918-2009 ASTM D6962 BS EN 425-2002 BS EN 985-2001 ISO 10581-2011 ANSI-NALFA-LF...
	Aluminum Ointment Tube Toughness Tester	The ductility tester for aluminum tubes is a device specifically used to detect the ductility indicators of packaging materials such as aluminum so...
	Oxidizing liquid time pressure tester	Product Description Conforms to UN Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria 11.6.1 Test 1(c)(i): Time/Pr...
	Retroreflection and Chromaticity Testing Machine	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The tester is suitable for a wide range of applications: Traffic Safety Mater...
	Fire safety testing equipment for smoke detectors	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Smoke Fire Detector Threshold Test Chamber is suitable for: Threshold ver...

All supplier products

Same products

	Advanced haptic feedback skill logging system	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application You can apply the Haptic Ski...
	Contact cooling characteristic tester	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application You can apply this tester to...
	Automated thermal property analyzer for high-temperature materials	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The tester is suitable for: ...
	High-precision rapid thermal conductivity tester for geotechnical materials	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application This testeris designed for t...
	Automated TPS and Hot Disk thermal conductivity analyzer	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The tester is widely used fo...