Aerosol Sensor Test System，Aerosol and Dust Monitors Test System

The Aerosol Sensor Test System is designed for development, testing, and calibration of active and passive aerosol sensors, including PM and PN sensors. It combines features from filter media test systems with flexible sensor integration and broad flow ranges, enabling accurate evaluation of particle mass or number concentration. The system can be configured with two measurement sections to cover flow rates from 0.8 m³/h to 450 m³/h.

Application

(1) PM Sensor Calibration and Quality Assurance: For production-line calibration and quality control of PM sensors.

(2) PMx and PNx Sensor Development: Supports development and performance testing of fine particle sensors.

(3) Sensor Aging Studies: Investigation of long-term performance and aging behavior of sensors.

(4) Aerosol Technology Research: Supports fundamental research in aerosol measurement and instrumentation.

Standards

This system complies with and supports:

(1) GB/T 14295-2019 – Air filters.

(2) GB/T 13554-2020 – High-efficiency air filters.

(3) GB/T 6165-2021 – HEPA filter performance: efficiency and resistance.

(4) ISO 11057 – Filter media performance testing.

(5) EN 1822-4 – HEPA filter testing.

(6) ISO 29463-4 – High-efficiency air filter performance.

(7) ASTM D6830 – Evaluation standard for air filters.

Parameters

Parameter	Unit	Value
Test Flow Rate	m³/h	0.8 – 450
Test Concentration	µg/m³	5 – 1000 (at 100 m³/h)
Test Medium Differential Pressure	Pa	≤ 10000 (for 450 m³/h)
Gas/Air Supply	–	Compressed air, max. 10 bar
Power Supply	–	400 VAC, 25 A
Particle Measurement	–	Customer-specified (e.g., LAP 323)
Sensors	–	Differential pressure, temperature, relative humidity, absolute pressure
Duct Diameter	mm	150 (internal)
System Dimensions (W × H × D)	mm	2300 × 1500 × 900
Weight	kg	approx. 400

Features

Stable and Adjustable Aerosol Generation: Provides consistent aerosol concentrations across variable flow rates.

Solid and Liquid Aerosol Capability: Supports both types of aerosols to meet diverse test requirements.

Customer Customization: Adapts to different sensors, sample holders, and measurement configurations.

Broad Application Range: Suitable for PM and PN sensor calibration, testing, and development.

Fully Integrated System: Seamless integration with external equipment for optimal performance.

User-Friendly Software Control: Win-based interface for simplified operation, data acquisition, and result analysis.

Accessories

Accessory	Quantity
Aerosol Generator	1
Laser Aerosol Particle Spectrometer	1
Sample Holder	As required
Customer-Specified Sensors/Equipment	As required

Test Principle

Aerosol Generation: Aerosol is generated via a dedicated generator and distributed evenly in the measurement duct.

Sensor Integration and Testing: Customer PM sensors are integrated and tested, with reference measurements using laser aerosol spectrometers.

Aerosol Concentration Measurement: Upstream and downstream particle concentrations are monitored in real time.

Multi-Segment Measurement: Optional dual-section configuration supports different flow ranges for comprehensive sensor evaluation.

Operation Instructions

System Startup:

- Check power, air supply, and aerosol generator.

- Configure test parameters including flow rate, aerosol type, and sensor setup.

Testing Process:

- Install sensors into sample holders.

- Start the test; the system automatically generates aerosol, measures particle concentrations, and evaluates sensor performance.

Data Recording and Reporting:

- Win software records all test data and generates detailed reports for quality control and further analysis.

Experimental Procedure

Preparation Stage:

- Configure all devices, including aerosol generator, sensors, and flow measurement instruments.

- Ensure ducts and sample holders are correctly installed.

Testing Stage:

- Start the system; automated measurement of particle concentrations, sensor calibration, and performance evaluation occurs.

Result Analysis and Reporting:

- Software generates reports including sensor efficiency, differential pressure response, and other key parameters.

Maintenance Information

Regularly check aerosol generators, sensors, and measurement devices.

Ensure calibration of flow and particle measurement instruments.

Keep ducts and sample holders clean to maintain consistent results.

Other supplier products

	Multiphase High - temperature and High - pressure Explosion Limit Tester	The Multiphase High-Temperature and High-Pressure Explosion Limit Tester is an instrument developed based on standards such as EN 1839, ASTM E918, ...
	Protective Clothing Synthetic Blood Penetration Tester	Introduction It is applicable to the resistance of the protective clothing to the synthetic blood penetration under different levels of test press...
	Carpet Dynamic Load Tester	Compliance Standards ISO 2094: 1999 (BS) QB/T 1091-2001 ASTM D3574 TEST I4 Instrument Features Provide information on the reduction in the thi...
	Contact heat transmission test machine	Introduction: This part of ISO 12127 specifies a test method designed to evaluate the heat transfer and the behaviour ofmaterials used for prote...
	Electrode tortuosity tester & diaphragm ion conductivity tester	The Electrode Tortuosity Tester and Diaphragm Ion Conductivity Tester are precision systems designed for advanced analysis of battery electrodes an...

All supplier products

Same products

	Dynamic Shear Rheometer	Seller: Standard Groups	Dynamic Shear Rheometers are configured to meet the demands of everyday quality control testing o...
	Noxious Gas Test Chamber	Seller: Standard Groups	Noxious gas tеst chambеrs play a crucial role in thе industrial sector by еnsuring thе longеvity ...
	Chest Drainage Tester	Seller: Standard Groups	The Chest Drainage Tester is a precision instrument designed to evaluate the performance of dispo...
	Plastic Smoke Density Tester	Seller: Standard Groups	You can use the F313 Plastic Smoke Density Tester in the following areas: Plastics industry: Eva...
	Washing Fastness testing machine	Seller: Standard Groups	G228B washing fastness tester is used for washing, dry-clean color fastness testing. Electric tou...