Hydraulic Oil Precision Filter Tester，ISO 4406 hydraulic fluid precision filtration device
The Hydraulic Oil Precision Filter Tester is a specialized filtration device for processing high-precision industrial oils such as hydraulic oil, anti-wear hydraulic oil, and heat transfer oil. It belongs to the category of oil purification and regeneration equipment and is widely used in industries such as petroleum, chemical, metallurgy, power, and machinery manufacturing. This equipment effectively removes impurities, moisture, gas, and metal particles from the oil through purely physical methods, thereby restoring the oil's performance and extending the service life of hydraulic systems and related equipment.
Applications
Filtration of hydraulic lubrication system during refueling.
● Bypass filtration of hydraulic lubrication system during operation.
● Circulation filtration of hydraulic lubrication system before operation.
● Hydraulic lubrication system oil is not filtered and pumped out by the pump of the equipment itself.
(Note: This machine is not applicable to flammable and explosive media such as fuel oil.)
Standards
NAS 1638 : Cleanliness Requirements for Hydraulic Fluids
ISO 4406: 2021 Hydraulic fluid power — Fluids — Method for coding the level of contamination by solid particles
GJB 420A-2006 : Classification of Solid Particle Contamination in Hydraulic Systems and Components
GB/T 14039-2002 – Hydraulic Transmission: Oil contamination control and monitoring
GB/T 18854-2015 – Hydraulic Transmission: Determination of solid particle contamination levels
Features
1. Employs strong magnetic filter material for efficient adsorption and removal of metallic impurities such as iron filings;
2. Equipped with original imported polymer materials for thorough demulsification;
3. Combines coalescence separation technology with vacuum duplex three-dimensional flash evaporation process to significantly improve dehydration and degassing efficiency and thoroughness;
4. Utilizes internationally advanced multi-U-shaped gradually denser carbon fiber far-infrared heaters for uniform heating, high efficiency, and energy saving;
5. The entire filtration process is purely physical, without damaging the original properties of the oil or various additives; Strong wind cooling technology accelerates water vapor condensation and sedimentation, effectively protecting the stable operation of the vacuum pump.
Technical Parameters
| Technical Parameters | Specifications |
|---|---|
| Working Pressure | 0.6MPa |
| Differential Pressure for Alarm | 0.2MPa |
| Flow Rate | 50±5L/min |
| Medium | ≤160mm/s (20℃) |
| Accuracy | 5μm |
| Rated Power | 2.2KW |
| Power Supply Voltage | 3-phase 380V |
| Frequency | 50Hz |
| Operating temperature | 20℃ - 70℃ |
Accessoriess
1. Core Functional Components:
Dedicated gear pump (low noise, self-priming)
Multi-stage filtration system (including coarse filter and replaceable fine filter cartridges of different precision)
High-pressure pipeline and overflow protection device
Pressure gauge and differential pressure transmitter (for real-time monitoring of system pressure and filter cartridge contamination level)
2. Electrical and Control Components:
Control panel (including buttons and display screen)
Three-phase 380V power adapter
2.2KW rated power drive motor
3. Consumable Components:
Filter cartridges of different precision (matching 5μm and other precision requirements)
Seals (such as O-rings, pipeline gaskets, for leak prevention)
Sampling-related components (such as sampling bottles, pipeline connectors; some equipment comes with high-cleanliness sampling tools)
4. Auxiliary Components:
Casts (easy-to-move parts on the bottom of the equipment)
Instruction manual, certificate of conformity, and other documentation
Test Procedures
When the oil filter works for a period of time, the oil filter oil system pressure increases accordingly, the performance of its components have different effects, especially on the filter precision of the filter element of the shadow
core damage, the main reason for this is that the filter element of the differential pressure rises, the need to replace the filter element. Specific cleaning and replacement methods are as follows:
Cleaning: (only on the pump before the suction oil filter)
Cleaning cycle: oil filter continuous work for a week (about 150 hours)
a. Unscrew the top cover of the oil suction filter and take out the filter element.
b.Cleaning the filter element:When cleaning the filter element, soak it with gasoline for about half an hour and then remove the impurities with a brush.
Replacement
Conditions for replacement: When the oil filter is filtering, when the red indicator pops up on the differential pressure alarm installed on the pre-filter and fine filter, the cartridge needs to be
Replacement method: loosen the four bolts on the upper cover of the pre-filter and fine filter, remove the upper cover, take out and replace the filter element.
Precautions
The oil filter can not filter gasoline and other flammable liquids.
If the oil pool (or tank) of the oil is too dirty and there may be large obstacles, in the suction port should be installed on the large mesh filter protection.
The oil suction and discharge pipes should be kept clean.
Send product request
Other supplier products
 |
Laminoplasty Plate System Fatigue Testing Machine | Standard ASTM F2193-18: Specifies static/fatigue testing protocols for spinal constructs, including lamina fixation plates. ISO 12189-1: Defines ... |
 |
HD2 Pneumatic Foam Fatigue Tester，ISO 3385，Foam Fatigue Testing Machine | The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine designed to evaluate the dynamic fatigue durabilit... |
 |
Full Face Masks Flame Resistance Test Machine | Introduction Fireman fire-protective clothing is mainly composed of jacket and bibcomposition,may also wear fire protective helmets, fire protec... |
 |
ASTM D4060 Abrasion Tester | Application The Taber abrasion tester has a wide range of applications, covering multiple industries and fields. Its main application areas includ... |
 |
High-Pressure Friction and Wear Tester | High-Pressure Friction and Wear Tester is a temperature-controlled tribological testing system designed to evaluate friction and wear behavior of g... |
Same products
 |
Common Rail Control Valve Assembly F00ZC01307 | Seller: Pioneer Diesel Parts | Pioneer Diesel Parts Whats/App: +86 152 6025 8100 Web: pioneerdieselparts.com The Common Rail ... |
 |
Fuel Injector Control Valve Set F00RJ01479 | Seller: Pioneer Diesel Parts | Pioneer Diesel Parts Whats/App: +86 152 6025 8100 Web: pioneerdieselparts.com The Fuel Injecto... |
 |
Fuel Injector Valve Set F00RJ02213 | Seller: Pioneer Diesel Parts | Pioneer Diesel Parts Whats/App: +86 152 6025 8100 Web: pioneerdieselparts.com The Fuel Injecto... |
 |
Common Rail Injector Valve Set F00RJ00339 | Seller: Pioneer Diesel Parts | Pioneer Diesel Parts Whats/App: +86 152 6025 8100 Web: pioneerdieselparts.com The Common Rail ... |
 |
Fuel Injection Pump 723945- 51320 for Yanmar Wb93r Wb97r Wb97s Wb98a | Seller: Pioneer Diesel Parts | Pioneer Diesel Parts Whats/App: +86 152 6025 8100 Web: pioneerdieselparts.com The Fuel Injecti... |
