Rapid Thermal Conductivity Tester for Geotechnical Materials (Transient Plane Heat Source Method) ISO 22007
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Rapid Thermal Conductivity Tester for Geotechnical Materials (Transient Plane Heat Source Method) is a high-precision instrument based on the TPS (Transient Plane Source) technique, utilizing a Hot Disk probe. This tester measures thermal conductivity of geotechnical materials, including soils, rocks, and other solid specimens.
The Hot Disk method offers several advantages:
Direct measurement of heat propagation, saving significant testing time.
Avoids errors caused by contact thermal resistance, unlike steady-state methods.
Minimal sample preparation; solid samples only require a relatively flat surface.
The tester provides rapid, accurate measurements, with broad applicability and the ability to reduce the influence of natural convection during testing. The instrument includes a special circular sample holder for geotechnical specimens.
Reference standard: ISO 22007-2:2008.
Application
This testeris designed for thermal characterization of geotechnical materials, including:
Soils, clays, and sands
Rocks and rock aggregates
Cemented and compacted geotechnical specimens
Building foundation materials and insulation layers
Typical applications include:
Geotechnical research and engineering labs
Civil engineering thermal property evaluation
Environmental and geoscience studies requiring thermal conductivity data
Rapid testing of core samples or cylindrical specimens
Standards
ISO 22007-2:2008 – Determination of Thermal Conductivity and Thermal Diffusivity of Solids by Transient Plane Source (TPS) Technique
Parameters
| Item | Specification |
|---|---|
| Thermal conductivity range | 0.001–100 W/(m·K) |
| Measurement time | 1–60 seconds |
| Accuracy | Better than 3% |
| Temperature range | Standard: room temperature; optional: -20–120°C (additional cost) |
| Sample dimensions | Height ≥10 mm; diameter ≥45 mm; relatively flat surface required |
| Sample type | Solid geotechnical specimens, soil cores, rock slices |
| Operation | Fully automated via software |
| Power supply | AC 220V, 50/60 Hz; total power |
| Reference standard | ISO 22007-2:2008 |
Features
Rapid testing: Complete measurement in 1–60 seconds.
Minimal sample preparation: Solid specimens only need a flat surface.
Avoids contact resistance errors: Ensures accurate results for geotechnical materials.
Automated operation: Software-controlled measurement, data analysis, and report output.
Special sample holder: Circular holder designed for soil and rock specimens.
Broad applicability: Can test a wide range of geotechnical samples under varying temperature conditions.
Accessories
Main instrument
Analysis software (Chinese & English version)
Hot Disk probe
Geotechnical circular sample holder
Power cable and basic user manual
Test Procedures
Prepare two geotechnical sample blocks with relatively flat surfaces.
Place the Hot Disk probe between the two sample blocks, ensuring full contact.
Set the test parameters in the software, including sample type and temperature range.
Start the test; the software automatically collects temperature data and calculates thermal conductivity.
Review the results and generate a report.
Maintenance Information
Keep the Hot Disk probe clean and free from debris.
Regularly inspect the circular sample holder for wear or damage.
Calibrate the instrument periodically using reference materials.
Maintain a stable laboratory temperature to reduce measurement variability.
Store the device in a dry environment to protect electronics and thermal components.
Send product request
Other supplier products
 |
Bursting Strength Tester | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The G229P Pneumatic Fabric Bursting Strength Tester is used to measure the bu... |
 |
Glove Thermal Insulation Tester Manufacturer Direct Sale China Factory Price | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The tester is primarily used in the following scenarios: Evalua... |
 |
Floor Caster Durability/Wear Resistance Tester (for Floor Caster Wear Tester) | Whats/App: +86 156 1874 6768 Web: standard-groups.com Meet the standard: GB/T 11982.2. GB/T 4085. BS/EN 425. ISO 4918-2009 ASTM D6962 BS EN... |
 |
Environmental Stress Cracking Resistance meter | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ASTM D1693: Exclusively designed for bending beam and constant load tests on poly... |
 |
Contact heating and cooling tester STD-F7 | Whats/App: +86 156 1874 6768 Web: standard-groups.com The sensation of coldness or warmth when skin touches a fabric is referred to as the "coldn... |
Same products
 |
HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line | Seller: Shandong HUASU Plastic Technology Co.,Ltd. | The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi... |
 |
PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
