Hydraulic Pump Contamination Resistance Tester
Applications
The Hydraulic Pump Contamination Resistance Tester is primarily used to test the fuel pump's resistance to contamination when operating in a working medium with a specified concentration of contaminants.
Standards
You can operate this tester in compliance with the following standards:
ISO 23840:2021 — Hydraulic fluid power — Filters — Evaluation of filter performance using multipass test (MPT) — Particulate filtration efficiency.
JB/T 7043-2006 — Hydraulic filter elements — Test method for rupture resistance.
GB/T 44682-2024 — Hydraulic fluid power — Filters — Evaluation of dirt-holding capacity of filter elements using multipass test.
GB/T 14039-2002 — Hydraulic and lubrication system oil cleanliness evaluation.
GJB 1003-1996 — Contamination testing powders and methods for aviation fuel pumps.
Features
1. Highly Targeted Functionality: Specifically designed to evaluate the performance and wear resistance of hydraulic pumps in contaminated fluid environments. It can simulate operating conditions in media with specified contamination concentrations and test the pump's resistance to contamination.
2. Multi-Standard Compliance: Compliant with industry standards such as ISO 23840:2021. JB/T 7043-2006. and GB/T 44682-2024. ensuring compliant and authoritative test results.
3.Practical Structural Design:Equipped with a mixing tank (including agitator), working oil tank, and other components, it supports circulating pump cooling and bypass circulation purification. A manual switching valve allows for switching between two sets of flow measurement devices.
4.Convenient Operation and Monitoring: Integrated control panel and display unit facilitate setting test parameters and real-time monitoring of pump operating status.
Technical Parameters
| No. | Technical Parameters | Specifications |
|---|---|---|
| 1 | Test oil | RP-3 aviation kerosene |
| 2 | Test powder | In accordance with the provisions of Table Ⅱ of GJB1003:1996 |
| 3 | Medium temperature | 10-40°C |
| 4 | Purification cleanliness | /-12/10 (GB/T |
| 5 | Test flow | 150 ~ 750L/min (fuel pump J/RLB-160; fuel pump J/RLB155-011); 250 ~ 1150L/min (fuel pump J/RLB-162) |
| 6 | Test pressure | 0 ~ 1MPa |
| 7 | Fuel tank volume | 1000L |
| 8 | Equipment power supply | AC 380V / 50Hz |
| 9 | Equipment power | 25KW |
| 10 | External dimensions | 5000 × 200 × 2000 (L × W × H) (subject to measurement) |
| 11 | Weight | 1000kg |
Accessoriess
1. Core Functional Components: Mixing oil tank (including agitator), conical working oil tank, circulating pump, bypass circulation and purification assembly, pump housing fixing device, flow measurement device, manual switching valve.
2. Control and Monitoring Components: Control panel, display screen, oil temperature/pressure sensors, electrical control module.
3. Auxiliary Components: Oil receiving pan, pipe fittings, seals (such as O-rings), instruction manual, certificate of conformity.
Send product request
Other supplier products
 |
Helmet Wearing Height Testing Machine | The helmet wearing height testing machine is a testing device used to evaluate the comfort and safety performance of helmets. It precisely measures... |
 |
Dry Sand Rubber Wheel Wear Tester | Standard ASTM G65 JBT_7705 Applicable standards Dry and wet abrasive wear testing machines usually need to follow certain standards and specifi... |
 |
Direcct flame impingement Tester | Introduction The testerisdesignedaccording to the BS476-12:1991.Method of test for ignitability of products by direct flame impingement.The accura... |
 |
Deval abrasion chamber | Product Introduction: Diphal abrasion testing machine is mainly used for stone abrasion rate test, suitable for European standards, French standar... |
 |
Sand Falling Abrasion Resistance Testing Equipment | Standards GB811-2022. GB24429 GB/T 38305 GJB1564A GA/T44. GA293 GA294 GA295 GA296 ASTMD968 ASTMD333 ASTMD1395 ASTMD2205 Main applicati... |
Same products
 |
VE Injection Pump VE3/9F1500L376AG | Seller: Pioneer Diesel Parts | Pioneer Diesel Parts Whats/App: +86 152 6025 8100 Web: pioneerdieselparts.com The VE Injection... |
 |
Automotive seat durability and strength testing machine | Seller: Standard International Group (HK) Limited | The Automotive Seat Three-Station Headrest and Backrest Static Strength Testing Machine is design... |
 |
Racing Seatback Headrest Restraint Device, Front and Rear Impact Testing Machine | Seller: Standard International Group (HK) Limited | The Racing Seat Headrest Restraint and Front-Rear Impact Testing Machine is designed to evaluate ... |
 |
Laboratory car wash simulator for automotive testing | Seller: Standard International Group (HK) Limited | The Laboratory Car Wash Simulator is a specialized testing system designed to replicate automatic... |
 |
Steam jet durability testing machine | Seller: Standard International Group (HK) Limited | The Steam Jet Test Chamber is designed to evaluate the durability and performance of materials an... |
