Fire testing system for large-scale structural safety testing
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Application
Battery Energy Storage System (BESS) Safety Testing
Evaluates fire resistance, flame spread control, and structural stability of storage containers under realistic fire scenarios.
Research and Development
Provides data for BESS design optimization, material selection, and safety engineering through large-scale fire testing.
Safety Certification
Supports compliance with UL 9540A, NFPA-855. and CSA TS-800. enabling standardized assessment for fire safety certification.
Fire Protection Engineering
Tests protective structures, fire barriers, and exhaust systems in large-scale energy storage facilities.
Standards
The system complies with the following international standards:
(1) UL 9540A-2025 – Standard for Evaluating Thermal Runaway Fire Propagation in Battery Energy Storage Systems
(2) NFPA-855 G.11 Appendix – Standard for Installation of Stationary Energy Storage Systems
(3) CSA TS-800 – Test Method for Large-Scale Fire Test Systems in Energy Storage Applications
Parameters
| Item | Specification |
|---|---|
| Footprint | Determined by actual test requirements |
| Electrical Load | Determined by actual test requirements |
| Heat Release Rate Measurement | Supports up to 20 MW stable combustion tests |
| Gas Analysis | Multi-functional gas analyzers including FTIR, total hydrocarbon analyzers, and sensors |
| Data Acquisition | 300+ temperature channels, 30+ voltage channels, optional 2–8 high-frequency pressure channels |
| Fire Triggering | 4+ heating channels, 8-channel high-voltage spark, 8-channel silicon nitride igniters |
| Monitoring | Thermal imaging infrared cameras, explosion-proof cameras, video recorders, optional high-speed or drone cameras |
| Environmental Monitoring | Temperature, humidity, atmospheric pressure, wind speed, wind direction |
Accessories
(1) Movable calorimetric test structure
(2) C-shaped refractory fire containment walls
(3) Exhaust gas purification system
(4) FTIR gas analyzer
(5) Total hydrocarbon analyzer
(6) Multi-channel sensors for temperature, voltage, and pressure
(7) Heating channels for fire triggering
(8) High-voltage spark and silicon nitride igniters
(9) Thermal imaging and explosion-proof cameras
(10) Remote monitoring control console
Send product request
Other supplier products
 |
Fireproof coatings tester chamber method | Whats/App: +86 156 1874 6768 Web: standard-groups.com The fire-retardant coating tester (combustion chamber method) is primarily used to test the... |
 |
Single-Flame Source Tester， ISO11925-2，DIN 53438; DIN4102-1 | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction This instrument is designed according to ISO11925-2. it is used to test build... |
 |
Total Hip Joint Prostheses Wear Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard YY/T 0651.1-2016 (China): Specifies wear testing parameters for total hip prosthe... |
 |
Horizontal/Vertical Flame Chamber UL 94 Chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com Description: This machine is designed according to plastic Materials flammability test; ... |
 |
Anti Igniting Test Machine for Mattress and Sofa ,ISO8191 | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction: The device isan analogcigarettes and matches as flame ignition source for re... |
