Adjustable catheter sliding performance tester equipment
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Applications
The catheter sliding performance tester is a precision instrument specifically designed to evaluate the sliding performance of medical devices - catheters. Its main purpose is to assess the surface sliding performance of disposable non - intravascular catheters, ensuring that when used in the human body, the catheters can reduce friction, alleviate patient pain, and achieve smooth insertion and infection prevention effects. Meanwhile, this tester also provides important evidence for the quality control and safety evaluation of catheters. In addition, it can be used for multiple tests such as the bending performance and tensile performance of catheters, providing clinicians with more comprehensive and in - depth data on catheter performance, further ensuring the safety and effectiveness of surgical procedures.
Standards
YY/T 1536-2017:Catheters other than intravascular catheters—Standard test model for evaluating the surface sliding performance
GB/T:National Recommended Standards of the People's Republic of China
ASTM:Standards of American Society for Testing and Materials
Technical Parameters
| Technical Parameter | Specification |
|---|---|
| Measurement Range | Usually 20N, 50N, 300N, 500N, 1000N, 1500N (one or more can be selected). Some devices are equipped with a 10N option, and 5N, 30N, 50N, etc. can also be selected. |
| Accuracy Class | Generally 0.5 class |
| Measurement Speed | For example, 1 - 600mm/min (stepless speed regulation) or 0.05 - 500mm/min (continuously adjustable, set via software) |
| Test Force Resolution | Such as 1/30000FS |
| Test Force Accuracy | Generally 0.5 class |
| Moving Speed Accuracy of the Middle Crossbeam | Such as ±1% |
| Maximum Tensile and Compressive Stroke | Such as 600mm |
Accessoriess
Operating system, host structure, clamping device, sensor, high-precision ball screw, stepper motor, water bath temperature control system, instruction manual, warranty card, certificate of conformity, power cord, data cable
Test Procedures
Install the tubing clamps into the clamping grooves of the clamping system. Adjust the distance between the two sliding clamps to the specified clamping distance, and then tighten the clamps, ensuring a good fit between the tubing clamps. Pass one end of the test tubing through the two tubing clamps from bottom to top, with the upper clamp of the testing instrument holding the tubing head. Insert the remaining portion of the tubing into a round tube filled with water, allowing it to immerse naturally for the manufacturer's recommended time. Adjust the position of the two sliding clamps in the grooves so that the tubing is centered. Start the testing instrument to allow the tubing to pass through the silicone pad a sufficient distance, and record the force versus displacement curve. Report the result as the average force value of the wetted section of the tubing on the curve.
Send product request
Other supplier products
 |
Cap Torque Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com A Bottle Cap Torque Tester is a specialized device used to measure the torque applied to ... |
 |
Automatic Rain Spray Tester | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com This instrument simulates rain sprayed horizontally onto a fabric sample vert... |
 |
Liquid Spontaneous ignition point tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Description complies with GB/T 21860-2008 “Test Method for Autoignition Temp... |
 |
Solid Combustion Rate Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction This product complies with "Recommendations on the Transport of Dange... |
 |
Battery Adiabatic Calorimeter | Whats/App: +86 156 1874 6768 Web: standard-groups.com Battery adiabatic calorimeters play a crucial role in battery research and development, pro... |
Same products
 |
ER4043 Silicon Aluminum Welding Wire | Seller: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line | Seller: Shandong HUASU Plastic Technology Co.,Ltd. | The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi... |
 |
PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
