Freeze and Humidity Test Chamber
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Application
This chamber is widely used in photovoltaic and related renewable energy fields, including but not limited to:
Thermal cycling and damp heat freeze reliability testing of crystalline silicon photovoltaic modules (monocrystalline and polycrystalline)
Environmental durability evaluation of thin-film photovoltaic modules such as CdTe, CIGS, and amorphous silicon
Temperature and humidity resistance verification of photovoltaic encapsulation materials including EVA, backsheets, glass, and encapsulants
Design verification (DV) and type testing (TT) during photovoltaic module development
Factory inspection and consistency quality control of photovoltaic modules
Standardized photovoltaic module testing in third-party inspection and certification laboratories
Environmental reliability research of new energy materials and devices in universities and research institutes
Standards
(1)GB/T 9535 Crystalline Silicon Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval
(2)GB/T 18911 Photovoltaic Modules – Environmental Test Methods
(3)GB/T 2423.1 Environmental Testing for Electric and Electronic Products – Part 2: Test Methods – Test A: Cold
(4)GB/T 2423.2 Environmental Testing for Electric and Electronic Products – Part 2: Test Methods – Test B: Dry Heat
(5)GB/T 2423.3 Environmental Testing for Electric and Electronic Products – Part 2: Test Methods – Test Ca: Damp Heat, Steady State
(6)IEC 61215 Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval
(7)IEC 61730 Photovoltaic (PV) Module Safety Qualification
(8)IEC 60068-2-1 / IEC 60068-2-2 / IEC 60068-2-30 Environmental Testing – Cold, Dry Heat, Damp Heat
(9)UL 1703 Standard for Flat-Plate Photovoltaic Modules and Panels
(10)JIS C 8918 Environmental Test Methods for Photovoltaic Modules (partially applicable)
Parameters
| Item | Technical Specification |
|---|---|
| Temperature range | -40 ℃ to 85 ℃ |
| Temperature fluctuation | ≤ ±1 ℃ |
| Temperature deviation | ≤ ±1 ℃ |
| Temperature uniformity | ≤ ±2 ℃ |
| Heating and cooling rate | Compliant with IEC 61215 requirements |
| Humidity range | 30 %RH to 98 %RH |
| Relative humidity deviation | ±3 %FS; 85 ±2 %RH; 90 ±2 %RH |
| Humidity fluctuation | ±2 %RH |
| Humidity uniformity | ≤ 2 %RH |
| Temperature change rate | ≤ 100 ℃/h |
| Extreme temperature dwell time | ≥ 10 min |
| Test cycle count | 200 cycles or 50 cycles |
| Maximum sample capacity | 12 photovoltaic modules |
| Inner chamber dimensions | Approx. 1.5 × 2.5 × 1.5 m (L × W × H) |
| Outer chamber dimensions | Approx. 2.5 × 3.0 × 2.5 m (L × W × H) |
| Power supply | AC 380 V / 60 Hz |
Accessories
(1)Programmable control system with touchscreen interface
(2)High-precision industrial-grade temperature and humidity sensors
(3)Refrigeration compressor unit using environmentally friendly refrigerant
(4)Photovoltaic module sample racks compatible with multiple module sizes
(5)Drainage and condensation management system
(6)Optional data acquisition and management software for PC connection and data export
(7)Optional remote monitoring module for operation status viewing
(8)Consumable sealing strips for periodic replacement
(9)Humidity water filtration components to ensure humidification water quality
Send product request
Other supplier products
 |
Import Infusion Pump Flow Rate Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The infusion set flow rate tester is an instrument specifically designed for ... |
 |
Surface Water Absorption Tester | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Fabric Water Absorption Tester is designed to test the ability of terry fabri... |
 |
Shoe hook core bending stiffness tester manufacturer | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Application Shanks Longitidinal Stiffness Tester determines the stiffness in... |
 |
Vertical flame test chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction The Vertical Flammability Chamber, designed for American Standards, measures ... |
 |
High Precision Automotive Sun Visor End Cap Assembly Line OEM Supplier for Interior Manufacturing | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Parameters ItemDescription Assembly Type Automated sunshade end ... |
Same products
 |
PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
 |
PanPHE gasketed plate heat exchangers | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanPHE gasketed plate heat exchangersare designed with easy access for regular servicing and for ... |
