Laboratory Fire Test System for Photovoltaic Modules

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Standards

The apparatus is designed to meet the requirements of the following standards:

(1) GB/T 30735-2014 – Test Method for Reaction to External Fire of Roofs and Roof Coverings

(2) ENV 1187: t1 – Test Methods for External Fire Exposure to Roofs

(3) ISO 12468-1:2013 (Method B) – Fire Performance of External Roofs and Roof Coverings — Part 1: Test Methods

(4) ISO 12468-1:2013 (Method C) – Fire Performance of External Roofs and Roof Coverings — Part 1: Test Methods

(5) UL 1703: multi-family and hotel room individual dwelling unit smoke detection monitors: electric signal detection of house dust;

(6)UL 790: standard method of fire test for roof covering materials;

(7)ASTM e 108-04: standard method of fire test for roof covering materials;

(8)NFPA 256: fire test of roof deck.

(9)IEC 61730-2 Appendix b: fire tests on PV modules.

Parameters

Item	Specification
Radiant Panel Radiation Surface	600 mm × 600 mm
Wood Crib Fire Gas Combustion Device	1 set
Test Specimen Rack Angle	Adjustable, 0–50°
Air Duct Material	SUS304 stainless steel
Air Duct Thickness	2 mm
Fan Airflow Capacity	Max. 250 m³/min
Fan Power	5.5 kW
Fan Frequency Control	3-phase 380 V, 5.5 kW
Air Duct Adjustable Angle	0–35°
Impeller Anemometer	3 units
Wind Speed Accuracy	0.1 m/s

Features

Frame-type structure for combustion and specimen holding systems, providing high mechanical stability.

Independent control cabinet and gas supply cabinet design, facilitating laboratory layout and improving operational safety.

Supplied with a compact stainless steel tube burner for wood shavings combustion tests.

Burner equipped with a silicon nitride igniter and UV flame detector, ensuring reliable ignition and real-time flame monitoring to prevent gas leakage.

Imported high-precision rotameter and branded pressure gauges for accurate control of fuel gas flow, combined with solenoid valves for automatic gas shutoff at the end of tests.

Specimen support frame constructed from welded metal square tubes and angle steel, ensuring rigidity during testing.

Adjustable specimen inclination angle using pneumatic actuation, allowing convenient push-button operation.

Fine honeycomb grille installed in the upper air duct and coarse honeycomb grille at the outlet to stabilize airflow.

Air duct angle adjustment driven by a ball screw and servo motor, enabling automatic and precise positioning.

Computer and dedicated software control the entire test process, ensuring convenient operation and reliable safety management.

Accessories

(1) Radiant panel assembly

(2) Wood crib fire gas combustion device

(3) Stainless steel tube burner

(4) Specimen support rack

(5) Air duct system with adjustable angle

(6) Centrifugal fan and frequency control unit

(7) Impeller-type anemometers

(8) Control cabinet and gas supply cabinet

(9) Computer and professional test software

Test Procedures

Specimen Installation

Mount the photovoltaic module or roofing specimen securely on the adjustable test rack and set the required inclination angle.

System Configuration

Adjust the air duct angle and configure the fan speed according to the selected test method and standard requirements.

Ignition and Heating

Activate the radiant panel and combustion system. For applicable tests, ignite the wood crib or burner using the silicon nitride igniter.

Fire Exposure Simulation

Expose the specimen to controlled thermal radiation and wind conditions to simulate external fire scenarios as defined in the selected method.

Monitoring and Recording

Monitor airflow velocity using the impeller anemometers and observe the combustion behavior of the specimen throughout the test.

Test Completion

After the test cycle is completed, the system automatically cuts off the gas supply and records test data for further evaluation.

Maintenance Information

Routine inspection of the burner, gas pipelines, solenoid valves, and flame detection system is recommended to ensure safe operation. The airflow system, including the fan, air duct, and honeycomb grilles, should be checked periodically for cleanliness and proper alignment. Moving components such as the specimen rack adjustment mechanism and air duct angle drive system should be maintained to ensure smooth operation. Electrical and control systems should be verified regularly according to laboratory safety procedures.

Other supplier products

	Foam Repeated Compression Tester	Foam repeated compression testing machine will accurately measure the thickness of the test piece, placed in the compression plate of the testing m...
	Cylindrical Battery In-Situ Volume Swelling Testing System	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard UL 1642: Standard for Lithium Batteries IEC 62660-2: Secondary Lithium-Ion Cells...
	Bone Plates Static Four - point Bending Tester	Standard YY/T 0342-2022: Chinese standard specifying methods for determining bending strength and equivalent bending stiffness of straight and pre...
	Automotive Seat Thermal Manikin	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application Automotive seat thermal comfort and humidity management testing Truck seat he...
	Dental Implants Static Torsion Testing Machine	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ISO 13498: Specifies static torsion testing protocols for dental implants, includ...

All supplier products

Same products

	ISO 29463 HEPA/ULPA filter performance testing System	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The system supports and compli...
	High-Precision ISO 16890 Filter Media Test Rig for R&D and QC	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The system can execute and com...
	Mobile Floor Scrubber Aging Life Tester IEC 60312	Seller: Standard Groups	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com TheMobile Floor Scrubber Aging L...
	ISO 12103 Cleanable Filter Media Test System	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The system complies with: (1)...
	Robotic Vacuum Cleaners Edge-Following Tester	Seller: Standard Groups	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com TheEdge-Following Test Equipment...