Automatic Kinematic Viscosity Tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
You can operate this tester in compliance with the following standards:
(1) GB/T 265-2017 – Petroleum Products: Determination of Kinematic Viscosity.
(2) ASTM D445-2020 – Kinematic Viscosity of Transparent and Opaque Liquids (for dynamic viscosity calculation).
(3) ISO 3104:2021 – Petroleum Products: Determination of Kinematic Viscosity.
(4) IP 71:2020 – Petroleum Products: Determination of Kinematic Viscosity.
Parameters
| Parameter | Unit | Value |
|---|---|---|
| Applicable Fluid | – | Newtonian liquids |
| Heating Method | – | Water bath with constant temperature electric heating |
| Test Capillaries | pcs | 5 (simultaneous testing) |
| Heating Medium | – | Clean water |
| Temperature Range | ℃ | Room temperature – 100 |
| Heating Power | W | 1700 |
| Temperature Control | – | Automatic, ±0.1℃ |
| Bath Dimensions | mm | Φ300 × 300 |
| Overall Dimensions | mm | 540 × 370 × 640 |
Features
High accuracy and repeatability; simple and user-friendly operation.
Efficient insulation material ensures superior temperature stability compared to traditional dual-bath designs.
Powerful stirring motor ensures uniform temperature distribution, improving measurement consistency.
High-precision automatic temperature control with ±0.1℃ accuracy.
Standard bath volume provides stable thermal conditions for accurate testing.
Five simultaneous testing channels increase experimental efficiency.
Specialized viscosity meter clamp ensures safe, reliable handling of capillaries.
Accessories
(1) Capillary Viscometers: Calibrated for measuring flow time.
(2) Clamps: Specialized fixtures for secure holding of viscometers.
(3) Thermostatic Bath: With stirring function to maintain uniform temperature.
(4) Heating Control Instrument: Automatic temperature control.
(5) Stirring Motor: Ensures even temperature distribution in the bath.
(6) Power Cable: Standard 220 V, 50 Hz.
(7) Clean Water: Used as the heating medium.
(8) Temperature Sensor: Real-time monitoring of bath temperature.
Test Procedures
Fill the thermostatic bath with clean water and start the stirring motor.
Set the target temperature and wait until the system stabilizes.
Place the capillary viscometer into the clamp and inject the sample liquid.
Start timing as the liquid flows through the capillary.
Record the flow time and calculate the kinematic viscosity using the capillary constant.
Calculate dynamic viscosity by combining the measured kinematic viscosity with the liquid density.
After testing, clean the viscometers and clamps to maintain instrument hygiene.
Maintenance Information
Regularly inspect capillaries for cracks or residue.
Ensure the bath water is clean and replenished as needed.
Verify the stirring motor and heating system are functioning correctly.
Maintain the clamps and viscometer holders for secure operation.
Record all measurements and maintenance actions for traceability.
Send product request
Other supplier products
 |
Safety helmet retention failure and roll-off analysis system for ISO standards | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard (1)ISO 4151:Indian Standard for Protective Helmets (2)ECE R22.05:U... |
 |
Computerized safety helmet impact testing system for EN 1078 certification | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard (1)GB 811:Helmets for motorcycle and electric bicycle users (2)GB ... |
 |
Molten Metal Penetration Resistance Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ISO 9185(Protective Clothing - Assessment of Resistance to Molten Metal Splash)... |
 |
Industrial Scratch Testing Equipment KK Series KK01 KK02 KK03 Supplier | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The tester complies with the following international standards: I... |
 |
ASTM D6830 Aerosol Sensor Test System | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards This system complies with and supports: (1) GB/T 14295-2019 – Air filters... |
