Anthropomorphic test dummies

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Standards

EN standard (Euro-American sign)

GB standard (Chinese/Asian sign)

Features

The manikin's interior incorporates various metals, plastics, and rubber components, including a steel chest cavity, aluminum shoulder blades, plastic pelvic bones, and silicone skin. Additionally, numerous precision instruments such as accelerometers, potentiometers, and pressure sensors are installed throughout its structure to record the forces exerted on the manikin during collisions.

Head and Neck:

The skull and cranial vault are constructed as a single aluminum alloy unit, covered with either soft skin or hard synthetic resin. The neck combines rubber and aluminum alloy structures, with a central communication cable that simulates the dynamic structure, rotational flexibility, and extension feedback of the human neck.

Upper Torso:

The high-strength six-rib steel cage in the chest cavity incorporates flexible elastic material to simulate human chest rebound characteristics under external force. The ribs include anatomically correct left and right ribs, with the sternum and spinal column riveted to the back.

The sternum connects the front ribs to a sternum bending/rotation potentiometer. The angle between the neck and upper torso determines the cervical spine curve assembly, which integrates a 6-axis neck sensor. Two clavicles and clavicle connectors secure the entire scapula and shoulder girdle linkage.

Lower Torso:

A cylindrical rubber lumbar spine assembly enables sitting and standing like a real human. An optional lumbar transport unit secures it to the pelvis. The skin covering the pelvic periphery and buttocks is made of infused soft rubber/ Polyurethane soft and elastic skin is applied to the pelvis periphery and buttocks. Leg bones with optional spherical joints that limit movement mimic human leg characteristics, enabling free flexion, extension, and rotation. Thigh bones, lower leg bones, and ankle bones can be fitted with detection instruments to predict leg bone fractures and assess knee ligament conditions and injuries. Feet and ankles simulate heel and ankle joints to achieve movement.

Technical Parameters

1. Crash Test Dummy

Item	Description
Composition	Head, neck, torso (with/without skin), upper/lower trunk, thigh (left/right), lower leg (left/right, including foot), upper arm (left/right), lower arm (left/right, including hand)
Posture	Maintainable in seated or standing position
Anthropometry	Matches 50th percentile adult male for all segments
Standing Height	1750±10 mm (no sitting height data)
Sitting Height	883.9±5.1 mm
Mass Distribution & Total Mass	Matches 50th percentile adult male; total mass 77.65±1.18 kg
Material	Aluminum alloy head, steel neck and chest components; rubber neck/lumbar; chest with simulated skin
Sensor Provision	Pre-installed sensor locations and wiring space at all segments

2. Dummy Sensors

Item	Description
Source	Optional, Chinese/US manufactured
Compliance	Meets SAE J211/1 requirements
Cable Length	10 m signal cable per sensor
Certification	Each sensor must provide a calibration report/certificate from a third-party metrology institute
Responsibility	Responsible for sensor calibration and installation/commissioning on the dummy

3. Sensor Types & Quantity

Location	Sensor Type & Quantity
Head	3 × Accelerometers
Upper Neck	1 × 6-axis Force/Torque Sensor
Lower Neck	1 × 6-axis Force/Torque Sensor
Chest	3 × Accelerometers; 1 × Displacement Sensor
Lumbar	0 × 6-axis Force/Torque Sensor
Knee Joint	Optional
Ankle/Foot	Optional

4. Head & Chest Accelerometers

Parameter	Specification
Range	2000g
Sensitivity	0.15 mV/g
Excitation Voltage	2 ~ 10 VDC
Frequency Response	0 ~ 5 kHz (±1/2 dB)
Nonlinearity Error	±1% FS

5. Upper Neck 6-Axis Force/Torque Sensor

Parameter	Specification
Measurement Directions	Fx, Fy, Fz, Mx, My, Mz
Range	9 kN (Fx, Fy), 13 kN (Fz), 280 N·m (Mx, My, Mz)
Excitation Voltage	2 ~ 15 VDC
Nonlinearity Error	< 1%
Hysteresis Error	< 1%

6. Lower Neck 6-Axis Force/Torque Sensor

Parameter	Specification
Measurement Directions	Fx, Fy, Fz, Mx, My, Mz
Range	13.3 kN (Fx, Fy), 13.4 kN (Fz), 454.6 N·m (Mx), 455.3 N·m (My), 453.7 N·m (Mz)
Excitation Voltage	2.5 ~ 15 VDC
Nonlinearity Error	< 1%
Hysteresis Error	< 1%

7. Chest Displacement Sensor

Parameter	Specification
Range	≥ 75 mm
Sensitivity	1.0802 mV/mm
Supply Voltage	5 VDC
Hysteresis Error	< 1%
Nonlinearity Error	< 2%

8. Lumbar 6-Axis Force/Torque Sensor

Parameter	Specification
Measurement Directions	Fx, Fy, Fz, Mx, My, Mz
Range	15.08 kN (Fx), 15.08 kN (Fy), 20.1 kN (Fz), 602.7 N·m (Mx), 602.0 N·m (My)
Excitation Voltage	2.5 ~ 15 VDC
Nonlinearity Error	< 1%
Hysteresis Error	< 1%

Test Procedure

Pre-inspection: Check for damage to the dummy's skin, verify normal damping sensation at all joints, and clean sensor interfaces.

Installation and Calibration: Install accelerometers, force sensors, and displacement transducers at designated internal locations on the dummy according to test requirements.

Posture Adjustment: Position the dummy on the test seat or platform, adjust torso angle and limb placement to ensure compliance with specified standard posture requirements.

Wiring Calibration: Connect to the signal acquisition system and perform zero-point calibration for all sensors.

Test Execution: Conduct collision or impact tests while simultaneously recording the manikin's dynamic physical response data.

Data Analysis: After testing, extract sensor curves and calculate core metrics such as HIC (Head Injury Criterion) and chest compression.

Other supplier products

	Waterproof socks testing machine	The Waterproof Socks Testing Machine is designed to evaluate the water resistance and waterproof performance of socks, shoes, and shoe linings made...
	Safety Helmet High Temperature Pre-Treatment Chamber	The safety helmet high-temperature pre-treatment chamber is manufactured according to the GB/T2812-2019 standard for safety helmets and is primaril...
	Automatic suture needle sharpness intensity tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Assessing Penetration Performance: By simulating the process of suture needle...
	Spinal Internal Fixation System Component Testing Machine	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard YY/T 0119-2014 (China): Specifies mechanical testing protocols for spinal fixatio...
	Textile Point-to-Point Resistivity Tester	Product Performance It is an essential instrument for the "Special Labor Protective Equipment Safety Certification" (LA Certification) and the "Sp...

All supplier products

Same products

	Walk-In Thermal Comfort Environmental Chambe	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards Internal compliance with labor...
	Laboratory Manikin for Simulating Human Coughing and Airflow	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 14296-2005 — Indoor...
	Breathing simulator manikin	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 14296-2005 — Indoor...
	Seat Comfort Thermal Manikin	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 18830-2009: Test methods ...
	Elmendorf Tearing Strength Testers ASTM D1424	Seller: Standard Groups	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com G008 Manual Tearing Tester, The ...