IV Set Pressure Leakage Testing Equipmen

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Standards

The Infusion Set Positive Pressure Leakage Tester complies with the following medical device standard:

GB 8368-2018 (Disposable infusion sets for single use, gravity feed)

Parameters

Parameter	Specification
Positive Pressure Output Range	120 kPa–160 kPa (adjustable), LED digital display, accuracy within ±5%
Positive Pressure Holding Performance	Pressure drop shall not exceed 1 kPa within 3 minutes
Test Duration	1 s–60 s (adjustable), LED digital display, accuracy within ±1 s
Pressure Range	0–69 kPa
Time Setting Range	0–999 s
Power Consumption	200 VA
Display Type	320 × 240 monochrome LCD, full Chinese window interface
Control Method	Keyboard control for menu navigation and on-screen keypad operation
Operating Temperature	5–40 °C
Relative Humidity	45–80%
Power Supply Voltage	220 V ±22 V
Power Frequency	50 Hz ±1 Hz
Equipment Classification	Class I, Type B

Features

Standard-oriented design

Developed specifically to meet the positive pressure leakage test requirements defined in national medical device standards.

Integrated intelligent control system

The built-in CPU, mainboard, LCD display, and keyboard enable stable control and precise parameter setting.

Clear and intuitive operation

Full-window Chinese interface with menu-driven operation allows straightforward use without specialized training.

Stable pressure control and monitoring

Adjustable positive pressure output with digital display ensures consistent test conditions and reliable leakage detection.

Compact and functional structure

Combines control, measurement, and data output functions in a single, practical testing unit.

Accessories

Power cable

Built-in printer

Drain outlet connector

Operation manual

Test Procedures

Place the instrument horizontally on a stable testing bench.

Install the test specimen securely onto the drain outlet connector.

Connect the power plug to the distribution board, ensuring reliable grounding of the power socket.

Power on the instrument and set the required positive pressure and test duration via the control panel.

Start the test and observe pressure stability during the test period.

Record or print the test results as required after test completion.

Maintenance Information

Regularly inspect pressure connections and sealing components to prevent leakage.

Keep the display screen and control panel clean and free from moisture.

Verify pressure accuracy periodically to maintain compliance with test requirements.

Ensure the power supply grounding is reliable before each operation.

Store the instrument in a clean, dry environment when not in use.

Other supplier products

	Bone Plates Static Four - point Bending Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard YY/T 0342-2022: Chinese standard specifying methods for determining bending stren...
	Laser compression testing equipment supplier	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) GB/T 7759-2008: Determination of compression set of rubber and rubber produc...
	Bubble Leak Tester	The Bubble Leak Tester utilizes a positive pressure testing principle and is suitable for the quantitative measurement of sealing strength, heat se...
	Sharp edge tester	Standards : ASTM F963 4.8. EN71-1998 8.14. GB6675-2003 A.5.9. 16CFR 1500.48 Basic Configuration： Sharp Edge Tester: 1 unit Foot switch: 1 set ...
	Burning Manikin System	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Burning Manikin System is primarily applied in the following areas: Fire ...

All supplier products

Same products

	Bluetooth catheter flow meter	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 15812.1 - 2005 Non - Vasc...
	Automatic Catheter Hydraulic Leakage Tester device	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 15812.1: Disposable steri...
	Balloon Catheter Leak and Compliance Tester	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ISO 13988-1:2017: Intravascula...
	Advanced catheter residual vacuum tester instrument	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards YY/T 0339 - 2019: Suction Cath...
	Bend catheter flexibility equipment	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ISO 10555 -Intravascular cathe...