Laboratory friction and wear tester with adjustable load
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
GB/T 3960-2008 Metallic Materials – Test Method for Friction and Wear (Ball-on-Disk)
GB/T 30770-2014 Tribological Test Methods for Plastics – Part 1: Indentation, Plate-on-Ball, and Sliding Wear
GB/T 6040-2008 Test Method for Wear Resistance of Metal Surfaces
ISO 7148-2 Plain Bearings – Testing of the Tribological Behaviour – Part 2: Ball-on-Disk Wear Test
ISO 4649 Rubber and Elastomers – Determination of Abrasion Resistance
ISO 12137-2 Coated Fabrics – Determination of Abrasion Resistance (Martindale Method)
ASTM D1044 Test Method for Resistance of Transparent Plastics to Surface Abrasion
ASTM D3702 Test Method for Wear Rate of Materials Using a Rotating Drum Apparatus
DIN 50324 Testing of Friction and Wear of Metallic Materials
Parameters
| Parameter Category | Specification |
|---|---|
| Sliding speed | 0.1 – 50 mm/s |
| Drive motor | AC servo motor |
| Drive mechanism | Gear and rack transmission |
| Sliding distance | Constant load: 1 – 50 mm |
| Variable / continuous load: 10 – 50 mm | |
| Vertical load | Low-load unit: 1 – 50 g |
| High-load unit: 100 – 10.000 g (19.61 N / low-load unit 0.98 N) | |
| Load transducer capacity | 0.98 N / 196.1 N |
| High-load unit range | 10 – 1000 g |
| Worktable size | 120 × 100 mm |
| Worktable operation mode | Single / reciprocating |
| Pre-start mode | Constant load / continuous load switching |
| Safety device | Overload protection |
| Noise suppression | CMRR: AC/DC ≥130 dB, NMRR: AC ≥50 dB |
| Zero adjustment | Digital servo automatic zeroing |
| Output (non-linearity) | 0 to ±5 V (within ±0.05% FS) |
| Sensitivity switching | 0 / 10 / 25 / 50 / 100% FS |
| Dynamic strain amplifier | S/N ratio: 60 dB (maximum sensitivity) |
| Frequency response | 2 kHz / −3 dB |
| Filter | 1 / 10 / 100 Hz low-pass filter |
| Operating environment | 0 – 50 °C, ≤85% RH, non-condensing |
| Power supply | AC 100 V, 50/60 Hz |
| Main unit dimensions | W730 × D490 × H665 mm |
| Extended configuration | W1000 × D520 × H900 mm |
Features
Traditional balance-arm loading structure ensuring high reliability and mechanical stability
Simple switching between constant load and continuous loading modes via touch panel
Automatic numerical load input system replacing conventional manual weight loading
Integrated displacement measurement for wear depth and scratch profiling
Standard configuration includes extended functionality such as Y-direction stage movement
Adjustable-angle moving worktable to support diverse test configurations
Accessories
(1) Scratch needle
(2) Ball indenter
(3) Rod gauge
(4) Weight set
(5) Power cable (2P/E, 2 m)
(6) Accessory cover
(7) Tool set
(8) Parts box
(9) Operating manual
Test Procedures
Secure the test specimen firmly on the worktable.
Select the appropriate loading unit based on the test requirement.
Set sliding speed, load mode, and travel distance via the touch panel.
Adjust the test configuration (ball, needle, or other contact geometry).
Start the test and monitor real-time friction force and displacement data.
Record wear depth, wear track characteristics, and friction behavior.
Analyze results according to the selected standard and test method.
Send product request
Other supplier products
 |
Color fastness tester for ironing sublimation | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com G247B Color fastness tester for ironing sublimation, It is used for the perfo... |
 |
Research Laboratory High-Temperature Tribometer G1000 | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 3960 Metallic Materials – Friction and Wear Test Method GB/T 12444 M... |
 |
Heavy-Duty Reciprocating Friction and Wear Testing Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Heavy-Duty Reciprocating Friction and Wear Testing Machine is a high-performance tribol... |
 |
IEC 60331 Cable Fire Resistance Test Equipment Supplier | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com E-mail：info@standard-groups。com Technical Specifications ItemTechnical ... |
 |
Battery Electrode Resistance Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ASTM B193: Standard Test Method for Resistivity of Electrical Conductor Materials... |
