Tribology test system with adjustable load
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
GB/T 6040-2008 Test Method for Wear Resistance of Metal Surfaces
ASTM D1894 Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting
JIS K 7317:2022 Plastics — Film and Sheeting — Determination of Coefficient of Friction
ISO 4649 Rubber and Elastomers — Determination of Abrasion Resistance
ISO 12137-2 Coated Fabrics — Determination of Abrasion Resistance (Martindale Method)
ISO 20502 Fine Ceramics and Coatings — Scratch and Wear Testing
ASTM G99 Test Method for Wear Testing with a Ball-on-Disk Apparatus
ASTM D3702 Test Method for Wear Rate of Materials Using a Rotating Drum Apparatus
Parameters
| Parameter | Specification |
|---|---|
| Sliding speed | 0.1 – 50 mm/s |
| Vertical load range | 10 – 1000 g / 1 – 50 g / 100 – 10.000 g |
| Load sensor capacity | 19.61 N / 0.98 N / 196.1 N |
| Worktable size | 120 × 200 mm |
| Main unit dimensions (Type 1) | W 710 × D 490 × H 710 mm |
| Main unit dimensions (Type 2) | W 1000 × D 520 × H 900 mm |
Features
Servo motor–driven gear and rack system for stable and precise motion control
Simultaneous measurement of friction force and wear displacement in a single test
Three-dimensional wear pattern generation for comprehensive tribological analysis
Multiple test modes, including constant load and continuously variable load
Touch panel interface for intuitive parameter setting and mode switching
High safety design with overload protection and advanced noise suppression circuitry
High signal stability with CMRR ≥130 dB (AC/DC) and NMRR ≥50 dB (AC)
Accessories
(1) Scratch needles
(2) Ball indenters
(3) Vertical gauge
(4) Load variation unit
(5) Set of calibration weights
(6) Power cable
(7) Tool set
(8) Parts box
(9) Operating manual
(10) Tribosoft software package
(11) Friction analysis software
(12) Notebook computer
Optional: Tribo CCD system, heating unit, cooling unit
Test Procedures
Mount the test specimen securely on the worktable.
Select the appropriate contact geometry, such as scratch needle or ball indenter.
Configure test parameters including speed, load range, and test mode via the control interface.
Start the test to apply friction motion under variable or constant vertical load.
Record real-time friction force and displacement data during operation.
Generate three-dimensional wear maps showing the relationship between load, friction force, wear depth, and wear cycles.
Identify critical load values corresponding to wear transitions based on test results.
Send product request
Other supplier products
 |
Sliding bearing PV friction testing machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard This machine is mainly applicable to GB 7948-1987 plastic bearing limit PV test m... |
 |
ASTM G99 Multi-Functional Tribology Tester for Advanced Material Research | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Multi-Functional Tribology Tester is a high-precision friction and wear t... |
 |
Smoke Density Chamber， ISO 5659，Smoke density testing equipment | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction The main principle is to measure smoke density in a particular space, cable o... |
 |
Cell thickness gauge | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ASTM E83: Standard Test Method for Verification of Linear Displacement Measurin... |
 |
So2 H2s CO2 HCl Artificial Climate Chamber | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com TheSO₂ H₂S HCl Corrosion Test Equipmentis designed to simulate corrosive envi... |
Same products
 |
HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line | Seller: Shandong HUASU Plastic Technology Co.,Ltd. | The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi... |
 |
PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
