Laboratory High-Temperature Reciprocating Wear Tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
GB/T 3960 Metallic Materials – Friction and Wear Test Method
GB/T 12444 Metallic Materials – General Principles of Wear Testing
GB/T 13678 Metallic Materials – Friction and Wear Performance Test Method
ASTM G133 Linear Reciprocating Friction and Wear Test (Ball-Flat)
ASTM G99 Pin-on-Disk Friction and Wear Test
ISO 7148 Sliding Bearing and Bearing Material Friction and Wear Test
DIN 50324 Material Tribology Performance Test
Parameters
| Parameter | Specification |
|---|---|
| Test Load Range | 5–80 N (automatic loading) |
| Load Control Accuracy | 0.2% F.S |
| Reciprocating Speed | 10–1000 r/min, continuously adjustable |
| Reciprocating Stroke | 1–15 mm |
| High-Temperature Furnace Range | Room temperature – 1000 °C |
| Temperature Control Accuracy | ≤ ±2 °C |
| Friction Coefficient Display Accuracy | ±0.001 |
| Control Method | Computer automatic control |
| Data Processing | Real-time display, storage, and analysis |
Features
Integrated high-temperature furnace and reciprocating friction system, enabling stable operation up to 1000 °C.
Automatic loading mechanism with closed-loop control for precise, stable, and repeatable load application.
Wide adjustable range for reciprocating speed and stroke to meet diverse testing requirements.
High-precision real-time friction coefficient display for capturing material behavior under high-temperature conditions.
Compact structure with high system stability suitable for long-term continuous testing.
Automatic stop and multiple safety protection features for secure operation.
Accessories
| Accessory | Description |
|---|---|
| High-Temperature Furnace | Core component for simulating high-temperature environment |
| Reciprocating Friction Assembly | Provides stable linear reciprocating motion |
| Automatic Loading System | Precisely applies test load |
| Friction Force / Coefficient Sensor | Real-time measurement of friction signals |
| Specimen Fixture | Secures specimens of various sizes |
| Counterbody (Ball/Pin) | Choice of friction pair materials |
| High-Temperature Insulation | Protects equipment and sensors |
| Control & Data Acquisition Software | Test control and data processing |
Test Principle
The specimen is mounted inside the high-temperature furnace and heated to the set temperature. The automatic loading system applies the desired load to the friction pair, and the reciprocating drive moves the counterbody in a stable linear reciprocating motion on the specimen surface. Friction sensors continuously measure friction force and calculate the coefficient of friction, while temperature and load variations are simultaneously recorded. Analysis of friction coefficient and wear behavior over time and temperature allows quantitative evaluation of high-temperature tribological performance.
Operation Instructions
Ensure the furnace, insulation, and temperature control systems are functioning properly before testing.
Avoid rapid temperature ramp-up that exceeds the allowed limits of the specimen or sensors.
Set load, speed, and stroke according to the relevant standard before testing.
Confirm the furnace has sufficiently cooled before replacing specimens or counterbodies to avoid burns.
Stop the test immediately if abnormal friction force or temperature fluctuations occur and check the system.
Experimental Flow
Set reciprocating speed, load, and stroke parameters.
Install specimens and counterbodies, then heat the furnace to the target temperature and stabilize.
Start the reciprocating friction system and initiate data acquisition for friction coefficient and temperature.
At test completion, automatically save friction curves and experimental data.
After cooling, analyze the wear track and quantify wear amount.
Send product request
Other supplier products
 |
Dry and Wet Retroreflectometer | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Dry and Wet Retroreflectometer, also known as the Dry and Wet Sand Abrasive Wear Testin... |
 |
Wet Microbial Penetration Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The wet microbial penetration tester is mainly used to evaluate the barrier ability of medi... |
 |
ISO 5660 Cone Calorimeter Fire Test Equipment Supplier Factory Direct | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Features Ignition System 10 kV spark igniter with fire-off safety system; p... |
 |
Xenon Light Fastness Test Chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com Features and Benefits 1.Full-Spectrum Xenon Lamp Xenon arc lamps emit a continuous spectr... |
 |
ISO 12956 Geotextile Equivalent Aperture Tester (Wet Sieve Method) | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The equivalent pore diameter of geotextile and its related produ... |
Same products
 |
ER4043 Silicon Aluminum Welding Wire | Seller: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing high-quality welding mate... |
 |
Choosing the Right Equipment for Heavy-Duty Cleaning | Seller: Taizhou Feike Mechanical Technology Co., Ltd. | FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve... |
 |
ER4043 Silicon Aluminum Welding Wire | Seller: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line | Seller: Shandong HUASU Plastic Technology Co.,Ltd. | The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi... |
 |
PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
