Industrial SRV High-Frequency Friction and Wear Testing Machine
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
(ASTM D5706) Determination of Extreme Pressure Properties of Lubricating Greases
(SH/T 0784) Lubricating Grease Extreme Pressure Test Method (High-Frequency Linear Oscillation Method)
(ISO 19291) Lubricants — Determination of Tribological Quantities for Lubricating Oils and Greases Using a Translating Oscillation Apparatus
(ASTM D5707) Measurement of Friction and Wear Properties of Lubricating Grease Using an SRV Test Machine
(ASTM D6425) Measurement of Friction and Wear Properties of Extreme Pressure Lubricating Oils Using an SRV Test Machine
(ASTM D7217) Determination of Extreme Pressure Properties of Solid Bonded Films Using an SRV Test Machine
(ASTM D7420) Determination of Mechanical Performance of Grease-Lubricated Plastic Socket Suspension Joints Using an SRV Test Machine
(ASTM D7421) Determination of Extreme Pressure Properties of Lubricating Oils Using an SRV Test Machine
(ASTM D7594) Determination of Fretting Wear Resistance of Greases at High Hertzian Contact Pressure Using an SRV Test Machine
(DIN 51834-1) Tribological Testing in Translatory Oscillating Systems — General Working Principles
(DIN 51834-2) Measurement of Friction and Wear of EP Lubricating Oils
(DIN 51834-3) Determination of Friction Behavior of Materials and Lubricants
(DIN 51834-4) Tribological Testing of Gear Oils and Hydraulic Oils
(DIN 51834-5) Standardized Projects for Automotive Applications
(DIN 51834-6) Measurement of Friction and Wear of Lubricating Greases
(DIN 51834-7) Determination of Extreme Pressure Properties of Lubricating Greases
(DIN 51834-8) Tribological Testing of Bonded Solid Lubricant Films
(DIN 51834-9) Evaluation of Lubricating Greases in Plastic Materials
Parameters
| Parameter | Specification |
|---|---|
| Stroke | 10 µm–2.8 mm / 0.1 mm–5 mm |
| Frequency | 300 / 500 Hz |
| Friction Force Detection | High-resolution piezoelectric sensor |
| Drive System | Electromagnetic voice-coil actuator |
| Temperature Range | Room temperature to 350 °C (optional −40 °C and up to 800 °C) |
| Maximum Load | Up to 3000 N |
Features
Real-time load control with stable force application
Electromagnetic voice-coil actuator for precise linear reciprocating motion
High-precision stroke control with nanometer-level resolution
Wide-range environmental chamber with closed-loop temperature control
Flexure-based design to eliminate rolling and bearing friction
Piezoelectric ceramic sensor with ultra-low noise amplification for real-time friction measurement
Support for additional online sensors, including acoustic emission and electrical contact resistance
Accessories
(1) Standard oil and reference samples
(2) Liquid test chamber
(3) Customizable sample holders
(4) Acoustic emission (AE) sensor
(5) Electrical contact resistance (ECR) sensor
Test Procedures
Install the appropriate specimen and counter-body in the sample holder according to the selected test method.
Set test parameters including load, frequency, stroke, temperature, and test duration via the control software.
Apply lubricant, grease, or solid film sample as specified by the relevant standard.
Start the automated test sequence; friction force and test conditions are monitored and recorded in real time.
After completion, remove samples for wear scar observation and data evaluation.
Maintenance Information
Regular calibration of the friction force sensor is recommended to maintain measurement accuracy.
The contact-free suspension and magnetic guidance system minimizes wear and reduces routine maintenance requirements.
Environmental chamber and sample fixtures should be cleaned after testing, especially when operating at elevated temperatures.
Periodic inspection of electrical connections and sensors ensures long-term system stability.
Send product request
Other supplier products
 |
Rapid Crack Propagation Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Rapid Crack Propagation Tester is primarily used for testing the critical pressure and ... |
 |
Hydraulic Oil Filtration and Dehydration Unit | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application You can apply this unit in the following scenarios: (1) Online or offline pur... |
 |
Mask Visual Field Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application Mask Visual Field Tester to determine whether field of vision under the mask m... |
 |
Dual-Purpose Manual & Automatic Tear Tester | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com G008 Manual Tearing Tester, The Elmendorf tear method can be used to test the... |
 |
Bonding Strength Measuring Instrument | Whats/App: +86 156 1874 6768 Web: standard-groups.com The tack - holding tester, also known as the tack - holding property tester, tack - holding... |
Same products
 |
HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line | Seller: Shandong HUASU Plastic Technology Co.,Ltd. | The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi... |
 |
PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
