Multi-Station Hip Joint Simulator
Get a quote：
Whats/App: +86 185 0176 3615
Web: qinsun-lab.com
The Multi-Station Hip Joint Simulator is a specialized tribological testing device designed to simulate friction and wear behavior of artificial hip joints under physiological gait conditions. Driven by motors and servo-pneumatic loading systems, it reproduces anatomically realistic motions of the femoral head against the acetabular cup with dynamic bi-axial loading. The simulator supports multiple stations running in parallel, providing a cost-effective solution for long-term wear testing, research, and quality evaluation of hip implants.
Application
You can use this simulator for:
In vitro wear simulation of total or partial hip joints.
Evaluating wear performance of femoral head and acetabular cup material pairings.
Studying metal–polymer, ceramic–ceramic, and ceramic–polymer bearing combinations.
Investigating long-term wear and failure mechanisms of artificial joints.
Comparative testing during medical device R&D.
Type testing and consistency verification of hip joint products.
Biotribology research at universities and research institutes.
Regulatory testing, product registration, and quality control of artificial hip joints.
Standards
ASTM F732 – Reciprocating Pin-on-Plate Wear Test (applied to joint simulators).
Parameters
| Parameter | Specification |
|---|---|
| Test Configuration | Acetabular Cup / Femoral Head |
| Number of Stations | 6 or 12 |
| Test Frequency | 1.06 Hz (50 Hz power) / 1.27 Hz (60 Hz power) |
| Maximum Load | 3 kN (6 stations) / 2 kN (12 stations) |
| Minimum Load | 0.4 kN |
| Average Load | 1.2 kN |
| Load Form | Double-peak dynamic load |
| Flexion-Extension (FE) | 46° |
| Abduction-Adduction (AA) | 12° |
| Force Trajectory Shape | Elliptical |
| Force Trajectory Ratio | 3.8 |
| Trajectory Length | 1.73 × r (r = femoral head radius) |
| Drive | Motor + Mechanical Crank |
| Motor Power | 370 W |
| Lubricant Volume | 500 ml |
| Controlled Parameters | Load, cycle number |
Send product request
Other supplier products
 |
Film impact tester ASTM D2794 | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The film impact testing machine, through the hemispherical punch at a certain spee... |
 |
Flatbed Ironing Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Email: serving@qinsun-lab。com TheFlatbed Ironing Testeris a precision instrument ... |
 |
Fabric liquid penetration tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Email: serving@qinsun-lab。com Main Parameters 1. The penetrating disc is made of... |
 |
Metal Wire Repeated Bending Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Metal Wire Repeated Bending Tester is designed to evaluate the bending fatigue... |
 |
Railway Rubber Pad Dynamic & Static Stiffness Fatigue Tester | Get a quote： Web: qinsun-lab.com Email：serving@qinsun-lab。com The Railway Rubber Pad Dynamic & Static Stiffness Fatigue Testing Machine is a... |
Same products
 |
PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
 |
PanPHE gasketed plate heat exchangers | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanPHE gasketed plate heat exchangersare designed with easy access for regular servicing and for ... |
