Multi-Purpose Friction and Wear Tester
Get a quote：
Whats/App: +86 185 0176 3615
Web: qinsun-lab.com
The Multi-Purpose Friction and Wear Tester is a laboratory testing system designed to evaluate friction behavior and wear performance of engineering materials under controlled contact, load, speed, and temperature conditions. You can use this instrument to conduct standardized and comparative tribological testing by simulating rolling, sliding, and mixed lubrication conditions commonly encountered in industrial applications.
Application
You can apply this tester in the following testing scenarios and product evaluations:
Bearing and transmission components: rolling bearings, sliding bearings, gear elements, and rollers
Mechanical parts: shafts, seals, valves, cams, bushings, and cylindrical components
Material research: metals, polymers, elastomers, ceramics, and composite materials
Lubricant evaluation: oils and greases under controlled temperature and load conditions
Surface engineering studies: coatings, heat-treated surfaces, and surface-modified materials
Academic and industrial laboratories: tribology research, teaching experiments, and method validation
Quality control and process optimization: material comparison, wear resistance verification, and durability assessment
Standards
GB/T 3960 — Method for Friction Testing of Metals
GB/T 3961 — Method for Wear Performance Testing of Materials
ASTM G77 — Block-on-Ring Wear Testing Method
ASTM G99 — Ball-on-Disk Wear Testing Method
ISO 7148-2 — Plain Bearings and Lubrication Friction Testing
DIN 50324 — Standard Methods for Friction and Wear Testing
Parameters
| Item | Specification |
|---|---|
| Contact geometry | Crossed cylinder / Ball-on-cylinder / Block-on-ring / Double roller |
| Center distance | 60 mm |
| Roller diameter | 60 mm |
| Sliding specimen | 12.7 mm ball, roller, or block |
| Speed range | 30 – 850 rpm |
| Maximum sliding speed | 4.7 m/s |
| Slip ratio settings | 0.00%, 3.33%, 5.00%, 10.00%, 15.00%, 20.00% |
| Maximum friction force | 130 N |
| Friction force measurement | Strain gauge sensor |
| Load range | 50 – 750 N |
| Load actuator | Pneumatic cylinder |
| Load control | Precision pressure regulator |
| Load measurement | Pressure sensor |
| Test chamber temperature | Ambient to 150 °C |
| Heating power | 150 W |
| Temperature sensor | Type K thermocouple |
| Motor | Brushless DC servo motor, 200 W |
| Control mode | Speed, temperature, and test duration automatic; load manual |
| Measured parameters | Speed, load, friction force, temperature, revolutions, time, sliding distance, friction coefficient |
| Software interface | USB communication module |
| Power supply | 220/240 V, single phase, 50 Hz, 1.2 kW or 110/120 V, single phase, 60 Hz, 1.2 kW |
Send product request
Other supplier products
 |
Xenon lamp aging test chamber | TheXenon lamp aging test chamberis a photoaging tester for large-capacity textile testing. With additional sample light frame, temperature sensor a... |
 |
Model Coin-cell Swelling System | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Model Coin-Cell Swelling System is designed for in-situ measurement of thickne... |
 |
Multi Finger Scratch/Mar Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Email: serving@qinsun-lab。com Multi Finger Scratch/Mar Tester uses tungsten carbi... |
 |
Automotive Seat, Mounting Device and Seat Belt System Testing Machine | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Automotive Seat, Mounting Device and Seat Belt System Testing Machine is desig... |
 |
Taber Abrasion Tester (Double-Head) | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Standards DIN Standards: DIN 53754 (plastics), DIN 53109 (paper/board), DIN 52347... |
