Total Hip Prosthesis Wear Testing Machine
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Total Hip Prosthesis Wear Testing Machine is a specialized laboratory device used to simulate the mechanical motions and loading conditions of the human hip joint. It evaluates the wear resistance, durability, and longevity of total hip replacement implants under repetitive movement cycles, helping assess the implant’s performance and predict its lifespan in vivo.
Standards
(1)YY/T 0651.1
(2)ISO 14242-1
These standards specify the relative angular motion between joint components, test loading patterns, test speed and duration, specimen assembly, and test environment requirements for wear testing of total hip prostheses.
Application
The Total Hip Prosthesis Wear Testing Machine is designed to simulate the in vivo mechanical conditions of hip implants and evaluate their wear performance over time. Key applications include:
Implant durability testing: Assess wear resistance and friction behavior of femoral heads, acetabular cups, and total hip components.
Material comparison: Evaluate different materials and coatings for reduced wear and improved longevity.
Quality control: Ensure hip prostheses meet mechanical and wear standards before clinical use.
Research and development: Optimize implant design, articulation geometry, and lubrication strategies.
Standards compliance: Perform tests according to ISO 14242. ASTM F1714. and other relevant international standards.
This machine helps predict implant lifespan and supports the development of safer, longer-lasting hip prostheses.
Specifications
| Parameter | Specification |
|---|---|
| Maximum load peak | 4400 N |
| Dynamic load peak | 3000 N |
| Static load peak | 2100 N |
| Machine grade | 0.5 |
| Load measurement range | 0.4%–100% F.S. |
| Load measurement accuracy | Better than ±0.2% of indicated value (within measurement range) |
| Maximum fatigue loading frequency | 100 Hz |
| Axial stroke | 30 mm |
| Displacement resolution | 0.1 μm |
| Testing space (vertical clamp distance) | 0–950 mm |
| Net weight | Approximately 900 kg |
| Overall dimensions | Approximately 1000 × 700 × 1800 mm |
| Optional Environmental Accessories | Water bath environment, high-temperature environment, low-temperature environment, humidity environment, etc. |
| Applications | Testing fatigue, fracture, and static performance of metals, polymers, composites, and other materials; static and dynamic testing of surgical implants (e.g., trauma, joint, spinal, dental implants); tensile fatigue testing of polymers; crack propagation testing in rubber materials |
| Optional Fixtures and Accessories | Mechanical tensile grips, compression grips, bending grips, femoral stem-specific fixtures, four-point bending fixtures, spinal rod/screw fixtures, tibial plateau-specific fixtures, vertebral resection model compression/tensile fixtures, dental implant fixtures, and other specialized testing attachments |
Send product request
Other supplier products
 |
In-situ Gas Analysis System for Lithium Battery Thermal Runaway，thermal runaway gas monitoring system | Whats/App: +86 156 1874 6768 Web: standard-groups.com The In-situ Gas Analysis System for Lithium Battery Thermal Runaway is an advanced testing ... |
 |
Seat Bumping and Creep Test Bench | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application Applications of the Single Station Jounce Tester include, but are not limited ... |
 |
Safety Footwear Electrical Hazard Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Safety Footwear Electrical Hazard Tester is designed to evaluate the dielectric strengt... |
 |
Laboratory Manikin for Simulating Human Coughing and Airflow | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 14296-2005 — Indoor Air Quality Evaluation Methods (Air Pollutant Exp... |
 |
Bearing Friction Torque Measuring device | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 32562-2016 JJF1137-2024 Main Purposes The bearing friction torque tester... |
