Salt Spray Test Machine
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Salt Spray Tester is used to create and maintain the salt spray (fog) test environment, and test the anti-corrosion quality of all the materials surfaces after the rust-proof of painting, coating, electroplating, anodizing and rust-proof of greasing. Our salt spray testers available in two capacities meet ASTM-B117. JIS-D0201. JIS-H8502. JIS-H8610. JIS-Z2371 and other International Standards test methods. Power supplied can be configured upon request.
Standards
(1)ASTM B117. ASTM G85. ASTM D1141-98
(2)DIN EN ISO 9227 (NSS, ESS, CASS)
(3)DIN 50942. DIN 53 167
(4)ASTM B 117-73. ASTM B 287-74. ASTM B 368-68
(5)DIN EN 60068-2-11
(6)BS 1224. BS 2011. BS3900 F4. BS 3900 F12. BS 5466 Part 1. BS 5466 Parts 2+3
(7)NFX 41002
(8)AS 21331 Section 3.1
(9)SIS 1841190
(10)JIS Z 2371
Application
Salt spray chamber is an international certification standardization and popular corrosion test method for checking the corrosion resistance of materials and surface coatings.
salt spray chamber is the inexpensive, fastest, standard and repeatable ,mainly used to detect salt spray corrosion resistance of the material or material surface coating which often in corrosive environment . The HD salt spray chamber is equipped with an intelligent salt spray test system that enables quick and standardized conversion of test modules. Automatically adjust the test temperature in the workpeace (Salt Spray Method (NSS ACSS) 35 ± 1 ° C, Corrosion-resistant Testing Method (CASS) 50 ± 1 ° C).
Features
1. The whole system using PVC plate, lined with the use of advanced three-dimensional reinforcement ring technology, structure and strong real, never deformation.
2. Five direction heating system to ensure heat distribution within ±1oC.
3. Highly advanced spray nozzle with accuracy of spray misting within ±0.3ml/80cm2.
4. Saturated air with Henry's law. In order to heated humidification, and provided the necessary laboratory humidity.
5. Temperature control uses P.I.D temperature controller within ±0.3oC accuracy.
6. The only use of early warning device test solution is too low, when the test solution is only enough for 5 hours and then spray the buzzer supplement will notify the user to ensure that the test of the value of the continuous spray.
7. The only use the full detection system, when a failure occurs, you can display or alarm lights inform.
8. With a spray and standing time period setting (for CAPA, SAE, ASTM).
9. Meets ASTM B117-03 the new improved design.
Parameters
|
MODEL |
STD-9701 |
STD-9701C |
|
|
TEST APPLICABLE |
NSS, ACSS, CASS |
CORK |
|
|
TEST TEMPERATURE |
35oC±1oC or 50oC±1oC |
38oC±1oC 80%~99%RH |
|
|
INSIDE DIMENSION |
900x600x500(WxDxH) mm |
900x600x500(WxDxH) mm |
|
|
OUTSIDE DIMENSION |
1420x780x1280(WxDxH) mm |
||
|
VOLUME |
270 LITER |
||
|
WEIGHT |
150KGW |
||
|
TEST SPECIMAN (150x70mm) |
at angle of 20o±5 |
48 PCS |
|
|
SOLUTION TANK |
CAPACITY |
30 LITER |
|
|
TESTING TIME |
180HR |
||
|
POWER CONSUMPTION |
220V SINGLE PHASE 3KW |
||
Send product request
Other supplier products
 |
Crash Test Dummy (Chinese Anthropometric Data) Manufacturer | China Population Safety Testing Equipment | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Crash Test Dummy is designed based on Chinese anthropometric data and rep... |
 |
Abrasive Wear Testing Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Abrasive wear testing machines are mainly used to evaluate the surface wear performance of ... |
 |
Alternative to PV Friction Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The testing machine can monitor the changes in friction force and the wear condition of the... |
 |
Luer conical joint multi-function tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application This tester is suitable for a broad range of medical Luer connection testing s... |
 |
Bone Plates Four-point Bending Fatigue Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard YY/T 1503-2016: Chinese standard specifying test methods for bending fatigu... |
Same products
 |
ER4047 Aluminum Mig Welding Wire | Seller: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing reliable welding material... |
 |
ER4043 Silicon Aluminum Welding Wire | Seller: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing high-quality welding mate... |
 |
Choosing the Right Equipment for Heavy-Duty Cleaning | Seller: Taizhou Feike Mechanical Technology Co., Ltd. | FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve... |
 |
ER4043 Silicon Aluminum Welding Wire | Seller: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line | Seller: Shandong HUASU Plastic Technology Co.,Ltd. | The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi... |
