Walk-in High Temperature Aging Test Room

Get a quote：

Whats/App: +86 181 0160 0864

TheHigh-Temperature Aging Chamberis designed to simulate high-temperature and harsh environmental conditions for high-performance electronic products, including computers, monitors, servers, cameras, automotive electronics, PCB boards, power supplies, motherboards, and chargers. You can use this chamber to evaluate thermal stability, product reliability, and overall durability, making it an essential tool for improving product quality, performance, and competitiveness in industrial production.

Applications

The High-Temperature Aging Chamber is a critical testing apparatus designed to simulate high-temperature and harsh environmental conditions for high-performance electronic products such as complete computers, monitors, terminals, servers, cameras, automotive electronics, PCBs, power supplies, motherboards, monitors, electrical appliances, and switch-mode chargers. It serves as an essential experimental device for enhancing product stability and reliability, and is a vital production process for improving product quality and competitiveness.

Standards

GB50052-95 Code for Design of Power Supply and Distribution

GB50054-95 Code for Design of Low-Voltage Distribution

GB50169-92 Code for Construction and Acceptance of Grounding Installations in Electrical Installation Engineering

Features

1. Control system integration with aging function design. The control cabinet features functional design, enabling operation of aging duration, temperature, and various switches from a single unit. The cabinet panel boasts an aesthetically pleasing design and intuitive operation.

2. Fully automated aging process with partial anomaly self-handling capabilities, streamlining operations for simplicity and automation.

3. Multiple safety protections ensure reliable operation.

4. Electric heating prevents dry burning. Automatic power shutdown occurs during fan failure or excessive duct temperatures, accompanied by audible alarms.

5. Interlocked heating and fan operation: Heaters cannot activate independently if fans fail to start.

6. High-temperature resistant wiring (non-combustible at 300°C) connects all heating elements.

7. Equipped with a 40W high-temperature-resistant explosion-proof indoor light fixture, extending bulb lifespan and preventing bulb explosions.

8. Chamber body constructed with flame-retardant insulation material, offering excellent thermal performance and high safety margins.

9. Over-temperature audible/visual alarm function: During aging processes, the chamber automatically cuts power and triggers an alarm upon detecting over-temperature or overload conditions.

Parameters

Item	Specifications
Dimensions	Room size specified by the customer according to on-site conditions
Insulation Material	Rock wool or polyurethane (choose one); thickness: 5.0 cm, 7.5 cm, 10 cm, or customer-specified
Temperature Range	RT ~ +45°C / ~70°C / ~+85°C
Temperature Fluctuation	±1°C
Temperature Deviation	±2°C / ±3°C / ±5°C, etc. (measured under no-load conditions)
Operation Mode	Temperature adjustable, constant temperature and fixed value operation (PLC program control or fixed value control)
Heating Power	Determined by the size of the aging chamber
Installation Power	380V, 50 Hz; if using 220V power, a minimum current supply of 120A is required

Accessories

Microcomputer PID temperature controller with digital display.

PT-100 platinum resistance sensors.

Stainless steel or galvanized ducting and high-performance axial fans.

Control panel with safety switches and indicators.

Explosion-proof internal lighting.

Optional exhaust system for temperature stabilization.

Test Procedures

1. Pre-Operation Preparation

Inspect chamber exterior for deformation, scratches, and aging of sealing strips.

Verify main power supply (380V standard) and control box power compatibility.

Check grounding resistance (<4Ω) using a multimeter.

Ensure temperature sensors are calibrated and clean (recommended annual calibration).

Confirm surrounding environment: ≥50 cm clearance, avoid direct sunlight or heat/cold sources; ambient 5–40℃, humidity ≤85% RH.

2. Startup Sequence

Turn on main chamber power, then the control box main switch. System performs self-check (~30s).

Observe display; ensure “Self-check complete” is indicated.

3. Preheating or Cooling

For rapid cooling, engage the “pre-cool” mode to reach target temperature minus 10℃.

For high-temperature tests, initiate “heating preheat” process with circulation fans to accelerate temperature stabilization.

4. Sample Placement

Place samples evenly, avoid overcrowding, ensure airflow circulation.

Verify total weight and volume do not exceed chamber limits.

5. Operation Monitoring

Continuously monitor internal temperature and fan operation.

Observe for abnormal alarms; take corrective action if necessary.

Restrict access to authorized personnel only.

Other supplier products

	Steiner Tunnel Test Furnace	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The ASTM E84 Building Materials Flame Spread Test Apparatus is designed to evaluat...
	Material Surface Performance Comprehensive Tester	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Multi-Functional Material Surface Friction Comprehensive Tester is a highly mo...
	Bag lifting fatigue testing machine / Bag Fatigue Testing Machine	Product Introduction: This machine is suitable for up and down vibration fatigue test of plastic handbag, garbage vest bag, kraft paper bag, woven...
	Spinal Pedicle Screw-Rod System Compression Fatigue Testing Machine	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Spinal Pedicle Screw-Rod System Compression Fatigue Testing Machine is a speci...
	Drying Rate Tester Air Flow Method	Get a quote: Whats/App: +86 181 0160 0864 The Airflow Method Fabric Drying Rate Tester is an automated precision instrument engineered to quantif...

All supplier products

Same products

	HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line	Seller: Shandong HUASU Plastic Technology Co.,Ltd.	The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi...
	PanEVAP & MVR system	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...
	PanGAP wide gap welded plate heat exchanger	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel...
	PanBloc welded plate heat exchanger	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac...
	PanBox welded plate heat exchanger	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated...