Temperature Humidity Vibration Combined Test Chamber

Get a quote：

Whats/App: +86 181 0160 0864

The Temperature-Humidity-Vibration Combined Test Systemis an advanced reliability testing platform that integrates climatic stress with mechanical vibration. By combining a high-performance environmental chamber with an electrodynamic or mechanical shaker, this system allows you to simulate the complex, multi-dimensional stresses that products face in real-world operating environments. It is engineered specifically to identify synergistic failure modes that single-stress tests might miss, making it an indispensable tool for safety screening and durability validation of critical assemblies.

Applications

Aerospace Sector: Evaluates the performance of aircraft components under temperature, humidity, and vibration conditions.

Electronics and Communications Industry: Conducts comprehensive testing on electronic components and communication equipment to assess their reliability in diverse environments.

Materials Science: Assists researchers in investigating changes in the physical and chemical properties of materials under varying environmental conditions, providing data support for new material development.

Automotive Manufacturing: Simulates the environmental conditions automotive components encounter in diverse climates and road conditions to evaluate their durability and reliability.

Standards

GB/T 2423.35‌ Procedures for combined temperature, humidity, and vibration testing, including environmental condition setting and performance monitoring

‌GB/T 28046.3‌ Focuses on automotive electrical and electronic systems, classifying severity by component installation location (e.g., engine, body) to simulate actual operating environments

GB/T 44279-2024 Covers combined temperature-humidity-vibration-low-pressure testing, enhancing simulation capabilities for extreme environments (e.g., high altitude or tropical climates)

IEC 60068-2-53 Test methods for electrical and electronic products under combined temperature, humidity, and vibration environments, emphasizing accelerated exposure of product failure modes through multi-stress superposition

ISO 16750-3 Prescribes coordinated testing of mechanical loads (vibration) and temperature conditions for automotive electronic equipment, ensuring component durability during vehicle operation

Features

1. Simultaneously simulate multiple environmental factors: Capable of concurrently simulating temperature, humidity, and vibration to more closely replicate actual product usage conditions, enhancing test accuracy.

2. Accelerates exposure of potential product defects: Through stress superposition, it expedites the manifestation of latent design flaws, manufacturing imperfections, or premature component failures, providing evidence for design enhancements.

3. Cost savings: Reduces equipment investment and testing space requirements, thereby lowering R&D and testing expenses.

Parameters

Item	Specification
Temperature Range	-60°C ~ +150°C
Temperature Change Rate	≥5°C/min (with load), average over the range of -40°C to 100°C
Temperature Deviation	≤±2°C (no load, steady state)
Temperature Uniformity	≤2°C (no load, steady state)
Temperature Fluctuation	≤±0.5°C (no load, steady state)
Humidity Range	20% R.H. ~ 98% R.H.
Humidity Deviation	+2% R.H. ~ -3% R.H. (when >75% R.H.), ±5% R.H. (when ≤75% R.H.)

Test Procedures

Sample Preparation: Develop test protocols based on product type (e.g., electronic components or metal parts) and record baseline data.

Environmental Simulation: Simultaneously apply temperature (-70°C to 150°C), humidity (10%-98% RH), and vibration stress within the test chamber using a multi-channel closed-loop control system.

Intermediate Inspection: Conduct visual inspections, dimensional measurements, and electrical tests at critical test phases (e.g., temperature peaks), comparing before-and-after data.

Data Analysis: Evaluate specimen responses, identify failure modes (e.g., resonance or material aging), and compile detailed reports.

Accessories

(1) Removable Floor Panels: Customized interface plates to match different shaker head expanders.

(2) Flexible Thermal Bellows: High-temperature silicone or reinforced fabric sleeves to seal the shaker-to-chamber connection.

(3) Multi-Channel Accelerometers: For real-time monitoring of vibration response at different points on the specimen.

(4) Cable Access Ports: Standard 100mm or 150mm ports for power and signal lines to the device under test (DUT).

(5) CCTV Monitoring: High-definition internal camera system to record specimen behavior during high-intensity vibration.

Other supplier products

	AATCC KMS-M6 Washer, KMS-M6D Dryer	Get a quote: Whats/App: +86 181 0160 0864 The AATCC KMS-M6 Washer and KMS-M6D Dryer are precision textile testing instruments designed to simulat...
	Shoe Heel Impact Fatigue Tester / Shoe Heel Fatigue Tester	Meet the standard BS-5131 SATRA TM21. etc Main uses Heel impact fatigue testing machine is mainly used to test the continuous impact tolerance ...
	2-Station Seatbelt Webbing Abrasion Tester	Get a quote： Whats/App: +86 181 0160 0864 The 2-Station Seatbelt Webbing Abrasion Tester is designed to evaluate the abrasion resistance of seatb...
	Geosynthetics Bursting Strength Tester ASTM D	Meet the standard: ASTM D3786-2008.SL/T .etc Scope of application: It is used to determine the bursting strength of geotextiles, geomembranes an...
	Nasal Oxygen Cannula Tester	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk This device is used to test various performance characteristics of nasal cannulas,...

All supplier products

Same products

	MMA-120 Handheld Arc Welder	Seller: 871183	The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con...
	SHX Series Circulating Fluidized Bed Steam Boiler	Seller: Hebei Genjux Boiler Co.,Ltd	Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi...
	YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler	Seller: Hebei Genjux Boiler Co.,Ltd	Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ...
	DHL Series Coal-Fired Steam Boilers	Seller: Hebei Genjux Boiler Co.,Ltd	Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b...
	SZL Series Biomass Steam Boiler	Seller: Hebei Genjux Boiler Co.,Ltd	Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi...