Full-Body Garment Stress Tester
Get a quote:
Whats/App: +86 181 0160 0864
TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exerted by tight-fitting garments or wearable apparel on the human body. You can use it to convert the tactile perception of garment pressure into measurable data, enabling accurate evaluation of comfort, support, and functionality. The device supports both static and dynamic testing on a mannequin, providing comprehensive pressure mapping for design optimization and performance verification.
Applications
Full-Body Garment Stress Tester is used to evaluate the pressure exerted by various form-fitting garments or other wearable apparel on the human body. It quantifies the perceived pressure of clothing on the body into specific numerical data and enables assessment of test results. The manikin can perform both static and dynamic testing.
Dynamic postures meet the following requirements, considering the integrity of the form: the rear of the knees must not be left unprotected.
Standards
FZ/T 70015-2022 :Test Methods and Evaluation of Pressure in Knitted Compression Garments
Features
1.Accurate measurement of garment pressure at multiple body locations with high-resolution sensors.
2.Supports bothstaticanddynamic testing, simulating real-life movement and posture.
3.Pressure mapping allows objective evaluation of garment comfort and functionality.
4.Dynamic mannequin posture designed to maintain full body integrity, with clearance behind knees.
5.Enables design optimization for sports, medical, and fashion applications through data-driven analysis.
Parameters
| Item | Specifications |
|---|---|
| Pressure Mannequin | Average Asian female body type, height: 155 ~ 165 cm |
| Pressure Measurement Range | 0 ~ 90 mmHg |
| Test Accuracy | ≤0.1 mmHg |
| Resolution | ≤0.1 mmHg |
| Sensors | 26 independent sensors, each measuring a separate point. The sensor surface is flat and stable, with no mutual interference between measurement points. |
Accessories
1.Full-body mannequin (Asian female average build, height 155–165 cm)
2.26-point high-precision pressure sensor array
3.Data acquisition and analysis software
4.Adjustable fixtures for dynamic posture simulation
5.Calibration tools and reference pressure standards
Test Procedures
I. Equipment Preparation and Calibration
Parameter Verification: Ensure equipment complies with FZ/T70015-2022 standards. The pressure manikin uses the average Asian female physique (height 155–165 cm).
Sensor Inspection: All 26 sensors must have flat surfaces and stable configurations to ensure independent measurements without interference.
Range Calibration: Pressure measurement range 0–90 mmHg, test accuracy ≤0.1 mmHg, resolution ≤0.1 mmHg.
II. Test Procedure
1. Static Testing:
Place the garment over the pressure manikin and adjust to the standard posture (void space behind knees).
Activate the equipment, record pressure values at each point, and analyze pressure distribution uniformity.
2. Dynamic Testing:
Simulate movement postures (e.g., running, jumping) and observe pressure changes.
Focus on pressure values in high-activity areas (e.g., armpits, waist).
III. Data Interpretation and Optimization
1. Comfort Assessment:
Excessive pressure (>90 mmHg) may cause constriction, while insufficient pressure fails to provide adequate support.
Optimize pressure distribution by adjusting fabric elasticity or cutting techniques.
2. Function Verification:
Performance compression garments must deliver moderate pressure to key muscle groups (e.g., thighs, calves) to reduce muscle vibration.
Medical garments must ensure uniform pressure distribution to prevent blood circulation obstruction.
Send product request
Other supplier products
 |
Leakage Test System | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk Test System for testing tightness and leackage for a high diversity of components ... |
 |
Leather thickness tester | Digital Leather Thickness Gauge | Product Introduction Leather thickness tester is a special high-precision instrument for leather thickness measurement, which can be widely used f... |
 |
Mechanical Load Testing Machine | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Mechanical Load Testing Machine is a precision instrument designed to evaluate... |
 |
Leather Vamp Flexing Extensibility Testing Machine / ISO 5423 / SATRA TM25 | Introduction: Vamp Flexing Tester is used to determine the propensity for materials to crack or otherwise fail at flexing creases, but can also be... |
 |
Benchtop Multi-Function Friction and Wear Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk Benchtop Multi-Function Friction and Wear Tester is a compact yet highly precise t... |
Same products
 |
Laser Cutting Machines | Seller: Chanxan (Changshu) Laser Technology Co., Ltd. | Laser Cutting Machines PrecisionLaser Cutting Systemsfor Film, Glass & Industrial Materials ... |
 |
Precision Laser Micromachining Machine | Seller: Chanxan (Changshu) Laser Technology Co., Ltd. | Precision Laser Micromachining Machine| Ultrafast Laser Micromachining Systems Chanxan provides ... |
 |
Ultrafast Laser Systems | Seller: Chanxan (Changshu) Laser Technology Co., Ltd. | Ultrafast Laser Systems Femtosecond Laser System Ultra-precision femtosecond laser systemfor hi... |
 |
Industrial Laser Equipment Manufacturer | Seller: Chanxan (Changshu) Laser Technology Co., Ltd. | Industrial Laser Equipment Manufacturer for Precision Cutting, Marking & Micromachining Chan... |
 |
Common Rail Injector Valve F00R J02 012 | Seller: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
