Textile Drying Time Tester

Getaquote:

Whats/App: +86 181 0160 0864

The Textile Drying Time Tester is a precision instrument designed to measure evaporation rate and drying time of textiles under controlled environmental conditions. It evaluates moisture absorption, drying efficiency, and fabric resilience, essential for quality assurance, R&D, and product development in textile manufacturing.

Type: Environmental testing chamber with humidity and temperature control

Application

The tester is widely used for:

Quality control of sportswear and moisture-wicking fabrics.

Research and development of quick-dry textiles and performance garments.

Testing waterproof and water-repellent fabrics for drying efficiency.

Forensic textile analysis of fabric degradation due to moisture exposure.

Textile education and training on drying mechanism principles.

Standards

ISO 11092 – Textile evaporative resistance

ASTM D737 – Air permeability and drying correlation

AATCC 195 – Moisture management properties

GB/T 12704-2019 – Chinese textile drying standard

Features

(1) Multi-Test Modes: Static drying, dynamic drying simulating body movement, and rain simulation for waterproof fabrics.

(2) Advanced Monitoring: Real-time moisture mapping using thermal imaging; AI-based drying prediction model.

(3) Automation: Auto-reset system after each test; motorized humidity control; self-cleaning condensate drainage.

(4) Batch Analysis: Compare multiple samples, export data in Excel or PDF.

(5) User-Friendly Operation: Touchscreen interface, programmable test cycles, and automated reporting.

Technical Parameters

Parameter	Specification
Temperature Range	20°C–60°C (±0.5°C accuracy)
Humidity Control	30%–90% RH (programmable)
Drying Mechanism	Airflow circulation (0.5–2.5 m/s) + infrared heating
Moisture Detection	Capacitive moisture sensor (±0.1% accuracy)
Sample Size	Up to 500×500 mm (adjustable clamping frame)
Power Supply	220V/50Hz, 1.8 kW
Dimensions	1200×800×1500 mm (L×W×H)

Accessories

Adjustable clamping frame for specimens

Water spray module for rain simulation

Data acquisition software for drying curves

Thermal imaging camera (optional)

Test Procedures

Sample Preparation: Cut specimens to 100×100 mm.

Calibration: Validate system with reference samples.

Testing: Start the cycle with predefined temperature and humidity.

Analysis: Generate drying curve and moisture loss graph.

Cleaning: Auto-drain condensate reservoir after testing.

Maintenance Information

Avoid contact with heated surfaces during operation and maintenance.

Ensure power supply is properly grounded.

Keep at least 50 cm clearance from airflow vents.

Regularly check moisture sensor calibration and clean condensate drainage.

Inspect airflow fans and heating elements periodically to maintain uniform drying conditions.

Other supplier products

	Scrub Abrasion Tester | Abrasion and Washability Tester	T107 Scrubbing Tester, It is suitable for various abrasion and wet scrubbing tests, which is commonly used in scrubbing resistance tests for interi...
	Luggage rod reciprocating fatigue testing machine / Luggage Fatigue Tester	Product Introduction: Luggage rod reciprocating testing machine for luggage rod reciprocating fatigue test. In the test, the specimen will be stre...
	Catheter Power Injection Flow and Pressure Tester YY 0285.1	Main Uses The catheter flow and pressure tester for power injection is an important medical device, mainly used to detect key parameters such as f...
	Scratch Resistance Tester	Product Introduction: The Scratch 5.5 Machine is a scratch and scratch test instrument for macroscopic scratches. It is a research-grade tribology...
	Demesia Zigzag Tester / Demesia Zigzag Machine	Compliance Standards IEC60695-2-1(Firehazardtesting) ISO6722(Roadvehicles-60Vand600Vsingle-corecables) ASTMD5422(StandardTestMethodforMechanical...

All supplier products

Same products

	HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line	Seller: Shandong HUASU Plastic Technology Co.,Ltd.	The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi...
	PanEVAP & MVR system	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...
	PanGAP wide gap welded plate heat exchanger	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel...
	PanBloc welded plate heat exchanger	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac...
	PanBox welded plate heat exchanger	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated...