Mullen & G229B Pneumatic Bursting Strength Tester
Getaquote:
Whats/App: +86 181 0160 0864
Bursting Strength Testeris widely used in textile , leather , paper and other fields. The bursting strength and height of woven, knitted, non-woven fabric, paper or board are measured by air pressure drum. It is the basic equipment for testing physical strength and strength of materials.
Mullen Bursting Strength Tester
Standard
ASTM D3786.AS2001.2.4.BS EN ISO 13938-1.GB/T 7742.ISO 13938-1.JIS L1018/L1093.IWSTM170
Main models
Common models for the C, A
Instrument features
1. the use of Mitsubishi 16-bit industrial-level MCU control, with strong anti-interference ability;
2. Equipped with Putian MT-300K printer, a test report can be printed with the output data.
Technical Parameters
Sensor Type: Pressure Transducer
Indicator Type: Digital Display
Operation Mode: Fully Automatic
Force Units: kPa, psi (lbs/in²), kgf/cm², with unit switching function
Burst Resistance Measurement Range: 250-5600 kPa
Clamp Ring Material: SUS#304 Stainless Steel
Clamp Ring Inner Diameter: Upper and Lower Clamp Rings φ31.5 ± 0.05 mm
Hydraulic Oil: 85% glycerin, 15% distilled water
Pressing Speed: High-Pressure Type 170 ± 10 ml/min
Accuracy: ±0.5%
Automatic Clamping and Release Device, Specimen Holding Force: >690 kPa
Dimensions: (L×W×H) 445 × 425 × 525 mm
Weight: 70 kg
Power: 120 W
Power Supply: 1∮AC220±10%, 50Hz
Standard Configuration: 1 rubber membrane, 1 wrench, 10 calibration sheets, 1 bottle of glycerin.
Optional: 1 air pump
G229B Bursting Strength Tester
Standards
▶ GB/T 7742.1 Textile fabrics bursting properties - Part 1: Determination of bursting strength and expansion ratio;
▶ASTM D3786 Test method for hydraulic bursting strength of textiles: diaphragm type bursting strength test method;
▶BS EN ISO 13938-1 Textile bursting characteristics, Hydraulic method for bursting strength and bursting expansion;
▶BS 3424-6-B Hydraulic method for determining fabric bursting strength;
▶ISO 3303-B/3303.2 Glued or plastic coated fabrics. Determination of tear strength;
▶ISO 2758 Paper. Determination of brittle fracture strength;
▶ISO 3689 Determination of bursting strength after immersion;
▶JIS L1018 Test method for knitted fabric;
▶JIS L1093 Test method for gap strength of textiles;
▶IWS TM170 International Wool Bureau Standard
Scope of application
Digital bursting strength testeris used for the detection of woven, knitted, non-woven fabrics, paper or board about the bursting strength and height.
Instrument features
A. Meet the maximum 100cm2 test area
B. Uniform clamping force, can be applied to all kinds of materials in all directions
C. Support online communication
D. Experimental area can be replaced, suitable for different standards
E. Store 50 custom standards
F. Test results such as: rich burst strength, bursting strength, diaphragm pressure, bursting height, and bursting time; make quality control personnel comprehensively understand the bursting performance of the sample.
G. Security shield automatic detection can automatically correct and exclude the film itself on the results
Instrument Configuration
1. One host
2. A set of the next clip ring (5)
3. Expanded broken film 1 package
4. Silent pump 1 set
5.Glycerine 1 bottle
6.Test rubber film (2 pieces)
7.Mute laboratory air compressor (optional)
Technical Parameters
A. Pressure: air pressure method
B. Measuring range: 0-1000kPa, accuracy: 0.2%
C. lower clip ring: 7.3cm2. 7.8cm2. 10cm2. 50cm2. 100cm2
D. Maximum expansion: 70 ± 0.02mm
E. Pressing rate: 1 ~ 100 kPa / min, speed adjustable
F. Output: print output, display output, real-time color graphics display
G. Power supply: Ac220V 50Hz 2000W
Send product request
Other supplier products
 |
SDC Fading Grey Scale | Applicable Standards The SDC Grey Scale adheres to international colorfastness testing protocols, including: ISO 105-A02(Grey Scale for Asses... |
 |
Pipe drop hammer impact testing machine | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk Product Introduction 1. Name: drop hammer impact testing machine 2. Model :G-1 ... |
 |
Bundle wire and cable burning test machine | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The bundled wire and cable combustion testing machine is manufactured in strict ac... |
 |
Stick Slip Test Stand for Material Combinations(G-SSP) | Get a quote： Whats/App: +86 181 0160 0864 The Stick-Slip Tribological Test Stand is a laboratory testing system used to evaluate friction-induced... |
 |
Dental Implant Fatigue Testing Machine | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Dental Implant Fatigue Testing Machine is a specialized device used to evaluat... |
Same products
 |
Common Rail Injector Valve F00R J02 012 | Seller: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
 |
Common Rail Injector Valve F00R J02 005 | Seller: 868983 | Common Rail Injector Valve F00R J02 005 David Chen |
 |
Common Rail Injector Valve F00R J01 945 | Seller: 868983 | Common Rail Injector Valve F00R J01 945 David Chen |
 |
Common Rail Injector Valve F00R J01 941 | Seller: 868983 | Common Rail Injector Valve F00R J01 941 David Chen |
 |
Common Rail Injector Valve F00R J01 924 | Seller: 868983 | Common Rail Injector Valve F00R J01 924 David Chen |
