Button Impact Machine
Get a quote:
Whats/App: +86 181 0160 0864
With the equipment the impact resistance of plastic sew-through flange buttons can be determined that a falling mass of 0.84kg (29.5oz) is released from a height of 67mm (2.625inch) or other heights as required. Cracking, chipping or breakage constitute failure.
Application
Button falling weight impact testeris used to determine the impact resistance of plastic sew-through flange buttons to a falling mass of 0.84kg (29.5oz), released from a height of 67mm (2.625 inches) or other heights as required. Evaluation Cracking, chipping and breakage, any of which constitutes damage. Test the remaining specimens.
Standards
ASTM D5171: Test Method for Abrasion Resistance of Inks and Coatings (referenced for impact-related durability assessments).
Features
1. Ensure the vertical alignment of tension;
2. Fixed button edge without affecting its adhesion;
3. Consistent force of 10s continuously;
4. Elevate and fix the position of the test meter through the handle, easy to change samples
5. Horizontal hand wheel, designed to cooperate with ergonomic principles to make operators more comfortable;
6. Safety buckle design makes operation more secure and reliable;
7. The long machine frame can extend the test scope more widely;
8. The concealed spring is designed to greatly increase the pin tightening and ensure the test repeatability;
9. Can reduce the damage caused by slid leakage during test process;
10. Simple design and accurate test results.
Parameter
| Parameter | Specification |
|---|---|
| Operating Mode | Manual |
| Impact Head Weight | 0.84kg |
| Impact Height | 32mm, 44mm, 67mm, 83mm, 95mm, 117mm |
| Body Material | Stainless Steel / Brushed Finish |
| Instrument Weight | 5kg |
| Power Supply | No (Manual Operation) |
| Appearance Size | 100mm (L) × 150mm (W) × 300mm (H) |
Accessoriess
The accessories for push-button impact drills (often referring to impact drills or similar equipment) mainly include the following types, each serving a different function to ensure the normal operation of the equipment:
Switch accessories: such as impact drill switches and gear selector switches, used to control the start, stop, and gear switching of the equipment, are key components for operating the push-button impact drill.
Transmission and impact components: including motors, shafts, sleeves, ratchet mechanisms, etc. These components work together to convert electrical energy into mechanical energy to achieve the impact function. For example, the motor drives the shaft to rotate, the shaft drives the sleeve and ratchet mechanism to move, thereby generating impact force.
Drill bits and chucks: The drill bit is the component that directly performs the drilling operation, while the chuck is used to fix the drill bit and ensure its stable operation. Different specifications and types of drill bits can be replaced according to the operation requirements.
Protective and auxiliary accessories: such as dust covers and limit ropes. Dust covers prevent dust generated during drilling from entering the equipment and protect it from damage; limit ropes are used to control the range of motion of the impact components and prevent them from separating from the main body of the equipment.
Battery and charger (for electric models): Provides power to the electric push-button impactor, ensuring continuous operation. Battery capacity and performance directly affect the device's runtime and efficiency.
Test Procedures
The operation of a button impact tester includes the following steps:
Confirm that the impact testing machine is connected correctly and the power supply is stable.
Prepare the impact specimen and confirm that its size, shape, and surface condition meet the test requirements.
Confirm that the ambient temperature and humidity meet the test standard requirements.
Wear appropriate protective equipment, such as safety glasses and gloves.
Turn on the power to the impact testing machine and start the operating system.
Place the impact specimen on the worktable of the impact testing machine, ensuring the specimen is stable.
Set the impact test parameters, such as impact energy and impact velocity.
Start the impact test program and begin the impact test.
Observe the changes in the impact specimen and record the impact test data.
After the impact test, turn off the impact testing machine and organize the test data.
During operation, always pay attention to safety precautions and perform regular maintenance and upkeep on the equipment to ensure its normal operation.
Send product request
Other supplier products
 |
Drying Rate Tester Air Flow Method | Get a quote: Whats/App: +86 181 0160 0864 The Airflow Method Fabric Drying Rate Tester is an automated precision instrument engineered to quantif... |
 |
Automatic Scratch Test machine | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Automatic Scratch Test Machine is a precision testing instrument designed to e... |
 |
Battery Powder Compaction Density Measurement System | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Battery Powder Compaction Density Measurement System is a precision testing sy... |
 |
Safety Helmet High Temperature Pre-Treatment Chamber | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The safety helmet high-temperature pre-treatment chamber is manufactured according... |
 |
Protective Clothing Liquid Static Pressure Resistance Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Protective Clothing Liquid Static Pressure Resistance Tester is designed to ev... |
Same products
 |
Laser Cutting Machines | Seller: Chanxan (Changshu) Laser Technology Co., Ltd. | Laser Cutting Machines PrecisionLaser Cutting Systemsfor Film, Glass & Industrial Materials ... |
 |
Precision Laser Micromachining Machine | Seller: Chanxan (Changshu) Laser Technology Co., Ltd. | Precision Laser Micromachining Machine| Ultrafast Laser Micromachining Systems Chanxan provides ... |
 |
Ultrafast Laser Systems | Seller: Chanxan (Changshu) Laser Technology Co., Ltd. | Ultrafast Laser Systems Femtosecond Laser System Ultra-precision femtosecond laser systemfor hi... |
 |
Industrial Laser Equipment Manufacturer | Seller: Chanxan (Changshu) Laser Technology Co., Ltd. | Industrial Laser Equipment Manufacturer for Precision Cutting, Marking & Micromachining Chan... |
 |
Common Rail Injector Valve F00R J02 012 | Seller: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
